j-QR-code

Scan qrcode to view mobile website

  1. Home
  2. Products
  3. Plastic Valves
  4. PVC Valves And Fittings
  5. PVC Foot Valve
Categories
PVC Foot Valve
PVC Foot Valve
PVC Foot Valve
PVC Foot Valve
PVC Foot Valve
PVC Foot Valve
PVC Foot Valve
PVC Foot Valve
PVC Foot Valve
PVC Foot Valve
PVC Foot Valve

PVC Foot Valve

UFV01
1. It has good tensile and compressive strength. 2. The fluid resistance is small, and the pipe wall is very smooth. 3. The corrosion resistance and drug resistance are excellent, and the pipeline is not affected by the moisture and soil pH, so no anti-corrosion treatment is required when laying the pipeline. 4. It has good water tightness whether it is connected by bonding or rubber ring. 5. Anti bite: PVC-U tube is not a nutrient source, so it will not be eroded by rodentsng; Low water absorption; Easy to bond and paint. Low price.
PLASTIC VALVES AND FITTINGS
ERA  Valves, PVC FOOT VALVE, UFV01,  PN10 (F1970), NSF-pw & UPC  

FOOT VALVES fulfill a specific purpose in PVC systems.

Foot valves function much like ball and check valves, but instead of allowing liquid to flow through them while surrounding the liquid, they are fully submersed in the liquid. This allows the valve to stop back flow completely in certain applications.

Scope：This system is intended for pressure applications where the operating temperature will not exceed 140°F, and work pressure is 1.0 MPa (PN10)

Specification：PVC foot valve shall be manufactured from virgid PVC(polyvinyl chloride) vinyl compounds.

Referenced Standards：ISO 9393-1:2004.

Specification：

Model NumberUFV01MaterialPVC
DescriptionPVC FOOT VALVESize15-160MM
StandardIOS9393-1:2004ColorSPECIFIED
BrandERATemperatureMax 60°C / 140°F
ConnectionSocket OR THREADCertificateNSF/UPC
Main Products：
PVC valve is a new type of pipe, with good corrosion resistance and pressure resistance, the main characteristics are safety and health. PVC valves have no harmful odor and are recyclable and safe materials. Sanitation is also important as a conduit for domestic water. The corrosion resistance and corrosion performance of metal water pipes are poor, and the long-term accumulation of scale has a greater impact on the quality of raw water. Metal water pipes were gradually replaced by PP pipes. It is safe to say that water pipes laid in buildings now use PVC valves.

PVC valves also withstand high and low temperatures very well. Although it may freeze and break, it is safe to use at temperatures not exceeding -20°C. As long as it does not exceed 70°C, the high temperature working environment is also very safe. It's more than enough for a household hose. In addition, anti-corrosion PVC valve long service life. Under normal circumstances, there is little need to worry about replacing them.

PVC ball valve is a very popular valve product made of PVC material. Because of its good corrosion resistance and high corrosion resistance, it is widely used in water treatment, chemical transportation, sewage treatment and other fields. PVC ball valves are suitable for water and non-corrosive liquid transmission. This kind of valve is widely used in various pipeline flow control because of its small resistance, light operation, quick and simple installation, economical and practical.

FAQ：
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services：
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.
7. You can also choose your own shipping forwarder.
Related Products
Plastic/PVC professional factory supply double union/True Union Ball Valve

Plastic/PVC professional factory supply double union/True Union Ball Valve

ERA Valves, PVC TRUE UNION BALL VALVE, UTB01, PN10 (F1970), NSF-pw & UPC System: Ball valve has dual o-ring stem design. May be installed on Sch. 40 or 80 PVC pipe These valves are ideal for the following applications: water parks, fountains, aquariums, light-duty chemical and waste water PVC ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used to regulate and control the fluid. Compared with other valves, it has the following advantages. 1. Small fluid resistance. Ball valves have the smallest fluid resistance among all valve types. Even if they are reduced diameter ball valves, their fluid resistance is quite small. The UPVC ball valve is a new material ball valve product developed according to the needs of various corrosive pipeline fluids. Product advantages: The valve body is light in weight, has strong corrosion resistance, has a compact and beautiful appearance, is light in weight and is easy to install, has strong corrosion resistance, has a wide range of applications, the material is hygienic and non-toxic, wear-resistant, easy to disassemble, and is simple and easy to maintain.
PVC True Union Ball Valve III

PVC True Union Ball Valve III

ERA Valves, PVC TRUE UNION BALL VALVE Ⅲ, UTB03, PN10 (F1970), NSF-pw & UPC Scope: True union valves have a carrier that can be removed from the piping system when needed. Our true union ball valves are made from durable dark gray PVC Plastic PVC valves are mainly used to cut off or connect the media in pipelines, and can also be used to regulate and control fluids. Compared with other valves, they have the following advantages. The fluid resistance is small and the plastic PVC valve has the smallest fluid resistance among all valve types, and its fluid resistance is also quite small. The plastic PVC valve is a new material plastic PVC valve product developed according to the needs of various corrosive pipeline fluids.
PVC Two Pcses Ball Valve With Stainless Steel Handle

PVC Two Pcses Ball Valve With Stainless Steel Handle

ERA Valves,PVC Two Pcses Ball Valve With Stainless Steel Handle , UCB06, PN10 (F1970), NSF-pw & UPC Scope: Please note - as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C). In addition to PVC plastic materials, plastic ball valves are also made of PPR, PVDF, PPH, CPVC, etc. PVC ball valve has excellent corrosion resistance. The sealing ring is F4. Excellent corrosion resistance and extended service life. Flexible rotation and easy to use. As an integral ball valve, PVC ball valve has fewer leakage points and high strength. The connected ball valve is easy to assemble and disassemble. Installation and use of ball valves: When connecting the flanges at both ends to the pipeline, tighten the bolts evenly to prevent flange deformation and leakage. Turn the handle clockwise to turn it off, and vice versa to turn it on. It can only be used to cut off or pass the flow, and it is not suitable to have flow adjustment. Liquids containing hard particles can easily scratch the surface of the ball.
PVC Single Union Ball Valve III

PVC Single Union Ball Valve III

ERA Valves, PVC SINGLE UNION BALL VALVE Ⅲ, USU03, PN10 (F1970), NSF-pw & UPC System: A quarter-turn of the handle fully opens or closes the valve for quick shutoff. Full port allowing maximum flow and minimum pressure drop or turbulence Features 1. PVC ball valve has good corrosion resistance and can be used for various liquids. 2. The valve has a simple structure and is easy to maintain. 3. For manually operated ball valves, the escapement mechanism is very flexible and facilitates long-distance operation. 4. The valve has reliable sealing, safe material and durability. 5. The price is relatively low and the service life is long, which greatly reduces pipeline operating costs.
PVC Compact Ball Valve M/f

PVC Compact Ball Valve M/f

ERA Valves, PVC COMPACT BALL VALVE M/F, UCTB04, PN10 (F1970), NSF-pw & UPC System: Full port allowing maximum flow and minimum pressure drop or turbulence Easy turn handle means no pliers or breakage while turning on/off, and it's replaceable. Features: 1. The ball valve has a thick body, strong sealing performance and good workmanship. 2. Raw material, smooth inner and outer walls, small water resistance 3. The handle conforms to the mechanical design, is easier to twist, and has no blocking feeling. 4. Made of sanitary-grade environmentally friendly materials 5. Watertight
PVC Two Pcses Ball Valve

PVC Two Pcses Ball Valve

ERA Valves, PVC COMPACT BALL VALVE M/F, UCTB04, PN10 (F1970), NSF-pw & UPC System: Full port allowing maximum flow and minimum pressure drop or turbulence Easy turn handle means no pliers or breakage while turning on/off, and it's replaceable! Product advantages 1. High-quality PVC strength and sturdiness ensure the service life of the valve. 2. The price is relatively low and suitable for various budgets. 3. Compared with valves made of other materials, PVC ball valve material has good corrosion resistance. PVC ball valve is a valve product with good corrosion resistance and economical practicality. The reason why people choose PVC ball valves is that its high-quality materials and reliability ensure its long life, and within its service life, the price advantage makes it more economical and practical.
PVC Octagonal Compact Ball Valve

PVC Octagonal Compact Ball Valve

ERA Valves, PVC OCTAGONAL COMPACT BALL VALVE, UCB04, PN10 (F1970), NSF-pw & UPC Scope: These valves are ideal for the following applications: water parks, fountains, aquariums, light-duty chemical and waste water. Our PVC ball valves are not only durably and made from a heavy duty material -...The valve body has light weight, strong corrosion resistance, compact and beautiful appearance, light weight and easy installation, strong corrosion resistance, wide application range, sanitary and non-toxic material, wear resistance, easy disassembly, simple and easy maintenance.
CPVC Union

CPVC Union

ERA Valves, CPVC UNION, CU001, (ASTM F1970), NSF-pw & UPC System: CPVC valves System Valve pressure rating 150 psi at 73°F water non-shock full-port, Maximum service temperature 180°F, Full port, EPDM O-rings, Includes both socket and female NPT thread end connections. Scope: Our TUBVs are... Characteristics of plastic valves Plastic valves are a type of valve made of engineering plastics. They have good chemical stability, corrosion resistance and temperature resistance, as well as light weight, good insulation, easy installation, and low maintenance costs.
Contact Us
USEFUL RESOURCES
OUR PRODUCTS
Send Us A Message

(373639)