The surface hardness and tensile strength of the pipe are excellent, and the safety factor of the pipe is high. Good aging resistance, normal service life can reach more than 50 years. The pipeline has excellent corrosion resistance to inorganic acid, alkali and salt, and is suitable for industrial sewage discharge and transmission. The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to block, and the maintenance workload is small. The material has high oxygen index and self extinguishing property. The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the deformation affected by temperature is small. The thermal conductivity and elastic modulus are small, and the frost resistance is better than that of cast iron drain pipes. The pipes and pipe fittings can be connected by bonding. The construction method is simple, the operation is convenient, and the installation efficiency is high.

The surface hardness and tensile strength of the pipe are excellent, and the safety factor of the pipe is high. Good aging resistance, normal service life can reach more than 50 years. The pipeline has excellent corrosion resistance to inorganic acid, alkali and salt, and is suitable for industrial sewage discharge and transmission. The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to block, and the maintenance workload is small. The material has high oxygen index and self extinguishing property. The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the deformation affected by temperature is small. The thermal conductivity and elastic modulus are small, and the frost resistance is better than that of cast iron drain pipes. The pipes and pipe fittings can be connected by bonding. The construction method is simple, the operation is convenient, and the installation efficiency is high.

ERA top quality PVC female adaptor for Pressure pipe AS/NZS 1477 Standard construction materialnSome of the most important properties of PVC are:n• Density. PVC is dense compared to other plastics.n• low cost. PVC is readily available and inexpensive.n• Rigidity. Rigid PVC ranks among the best in terms of stiffness and durability.n• strength. Rigid PVC has excellent tensile strength, which means it takes a lot of force to stretch and break.

All UPVC Pipe and Fittings are manufactured in compliance with AS/NZS 1477, the Australian and New Zealand standard for PVC Pipe and Fittings.UPVC Pipe is manufactured from 100% virgin Unplasticised Polyvinyl Chloride compound, no reworked material are used. All pipes are produced under strict ISO9002 Quality AssurancenPVC pipe is a common pipe material. It has excellent corrosion resistance, heat resistance, pressure resistance and wear resistance, so it is widely used in various fields. This article will introduce the common application areas of PVC pipes.n1. Construction fieldnPVC pipes are widely used in the construction field, mainly used for drainage, ventilation, water supply, etc. In terms of drainage, PVC pipes can be used for indoor drainage, rainwater drainage, sewage treatment, etc. In terms of ventilation, PVC pipes can be used in indoor ventilation, air conditioning systems, etc. In terms of water supply, PVC pipes can be used for cold water, hot water, drinking water, etc.n2. Agricultural fieldnPVC pipes are also widely used in the agricultural field, mainly used for irrigation, drainage, and transportation of fertilizers. In terms of irrigation, PVC pipes can be used for drip irrigation, sprinkler irrigation, micro-sprinkler irrigation, etc. In terms of drainage, PVC pipes can be used for farmland drainage, channel drainage, etc. In terms of transporting fertilizers, PVC pipes can be used for fertilizer transportation, spraying, etc.n3. Industrial fieldnPVC pipes are also widely used in the industrial field, mainly used for transporting chemicals, oil, natural gas, etc. In terms of transporting chemicals, PVC pipes can be used to transport acids, alkalis, salts, etc. In terms of transporting oil and natural gas, PVC pipes can be used to transport low-pressure oil, natural gas, etc.

HDPE Pipe Fitting System,Pipe and fittings shall be manufactured from virgin HDPE (High Density Polyethylene) compounds.nHigh-density polyethylene (HDPE) pipe is a plastic pipe widely used in water and natural gas transportation, drainage and sewage treatment. The main features of HDPE pipes are as follows:nCorrosion resistance: HDPE pipes have good chemical resistance and can therefore be used in a variety of chemicals and soil environments.nGood flexibility: HDPE pipes have high flexibility and can be easily bent during underground construction, thereby reducing the number of joints and lowering installation costs.

HDPE Pipe Fitting System,Pipe and fittings shall be manufactured from virgin HDPE (High Density Polyethylene) compounds.nAdvantagen1. PVC pipes have good tensile and compressive strength, but their flexibility is not as good as other plastic pipes.n2. The pipe wall of PVC pipe is very smooth, so the resistance of water flow is very small. Its water transport capacity is 20% higher than that of cast iron pipes of the same diameter, and the water transport effect is very high.n3. Moreover, PVC pipes are also very corrosion-resistant and chemical-resistant. They have good acid resistance, alkali resistance, corrosion resistance, are not affected by moisture and soil pH, and have a long service life.n4. PVC pipes also have good water tightness. This type of pipe can maintain good water tightness regardless of whether it is connected by bonding or rubber rings.n5. PVC pipe has good stretchability and thermal stability, can be adapted to different environments, and has a wide range of uses.n6. As mentioned earlier, PVC pipes have good hardness, so they are used as drainage pipes to prevent insect and ant erosion and have a longer service life.

HDPE Pipe Fitting System,Pipe and fittings shall be manufactured from virgin HDPE (High Density Polyethylene) compounds.n(1) The surface hardness and tensile strength of the pipe are excellent, and the pipeline safety factor is high.n(2) It has good aging resistance and its normal service life can reach more than 50 years.n(3) The pipeline has excellent corrosion resistance to inorganic acids, alkalis, and salts, and is suitable for industrial sewage discharge and transportation.n(4) The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to be blocked, and the maintenance workload is small.n(5) The material has a high oxygen index and is self-extinguishing.

HDPE Pipe Fitting System,Pipe and fittings shall be manufactured from virgin HDPE (High Density Polyethylene) compounds.nHDPE water supply pipes are widely used, mainly because they have advantages that other pipes cannot match:n1. It is easy to form a closed anti-seepage system by butt welding and electrofusion welding. When laying along the trench, the amount of earthwork excavated in the trench can be reduced and the amount of accessories used can be reduced.n2. Light weight and easy to install and handle;n3. Strong wear resistance and excellent hydraulic performance, no outer layer protection is needed in buried pipelines. It is suitable for earthquakes and soil settlement areas in mining areas, and can also be laid at the bottom of rivers by the sinking method.

ERA Piping Systems, PP Thread Fitting , FEMALE THREAD SOCKET , PT008 , (ENISO1587AS/NZS4129) , Watermark & WRAS More related products of PP THREAD FITTINGS TEE Production Process of PP THREAD FITTINGS TEE Company Introduction of PP THREAD FITTINGS TEE International Certificate of PP THREAD FITTINGS TEEn1. Odorless, tasteless and non-toxic. It is the lightest among commonly used resinsn2. Good heat resistance, continuous use temperature can reach 110-120℃n3. Excellent electrical properties, good resistance to high-frequency electrical insulation, and good electrical insulation in humid environments

ERA Piping Systems, PP Thread Fitting , BSPT& NPT THREAD TRANSFER SOCKET , PEC01 , (ENISO1587AS/NZS4129) , Watermark & WRAS More related products of PP THREAD FITTINGS TEE Production Process of PP THREAD FITTINGS TEE Company Introduction of PP THREAD FITTINGS TEE International Certificate of PP THREAD FITTINGS TEEnThe main material of PP is high-purity propylene, and then a small amount of ethylene is added, and then dried, mixed, extruded, granulated, screened and homogenized into polypropylene particles. The particles are cylindrical and have a very smooth surface. , without any impurities. In addition, it has good mechanical properties and heat resistance, and is not toxic when used in an environment of minus 30℃-140℃.

ERA Piping Systems, PP Thread Fitting , MALE THREAD SOCKET , PT009 , (ENISO1587AS/NZS4129) , Watermark & WRAS More related products of PP THREAD FITTINGS TEE Production Process of PP THREAD FITTINGS TEE Company Introduction of PP THREAD FITTINGS TEE International Certificate of PP THREAD FITTINGS TEE FAQ of...

ERA Piping Systems, PP Thread Fitting , Reducing Socket , PT011 , (ENISO1587AS/NZS4129) , Watermark & WRAS More related products of PP THREAD FITTINGS TEE Production Process of PP THREAD FITTINGS TEE Company Introduction of PP THREAD FITTINGS TEE International Certificate of PP THREAD FITTINGS TEEnCharacteristic:nGood chemical corrosion resistance: PP has good corrosion resistance from chemicals such as acids, alkalis, and salts, and can work stably in high temperatures, high pressures, and harsh environments. Therefore, PP is widely used in making corrosion-resistant containers, pipes, etc.nGood anti-ultraviolet and anti-oxidation properties: PP has good anti-ultraviolet and anti-oxidation properties, and can be used outdoors for a long time without aging or yellowing. Therefore, PP is widely used in making outdoor products, building materials, etc.

ERA Piping Systems, PP Thread Fitting , Socket , PT012 , (ENISO1587AS/NZS4129) , Watermark & WRAS More related products of PP THREAD FITTINGS TEE Production Process of PP THREAD FITTINGS TEE Company Introduction of PP THREAD FITTINGS TEE International Certificate of PP THREAD FITTINGS TEEnCharacteristics of PP plasticn1. The heat resistance is very good. PP products can be used in high temperature environments below 100 degrees for a long time, and will not be significantly deformed when the temperature reaches about 150 degrees.n2. The density is small, 0.81---0.91g/㎝3, which is the smallest density among commonly used plastics.n3. PP material has good mechanical properties, high heat resistance, good chemical properties, almost no water absorption, no reaction with most chemicals, pure texture, non-toxic, and good electrical insulation.

1. Hygiene: no chemical action, it is a green building material with reliable hygienic performance.n2. The installation is convenient, reliable and time-saving.n3. Heat preservation and energy saving, with little heat loss for hot water pipeline.n4. Light weight, high strength, good toughness and good impact resistance.n5. The inner and outer walls of the product are smooth, the flow resistance is small, and the energy consumption of the fluid conveying system is small.n6. Strong heat resistancenGood heat resistance. Vicat softening temperature of polypropylene - R pipe 131. 5℃。 The maximum working temperature can reach 95 ℃, which can meet the use requirements of hot water system in building water supply and drainage specifications.

PPR is a random copolymer polypropylene synthesized by (PP and PE) gas phase method. Its structural feature is that PE molecules are linked in PP molecules irregularly, with molecular weights ranging from 300000 to 800000. The pipes produced with PPR raw materials, also known as random copolymerized polypropylene pipes, are plastic pipe products developed and applied in the late 1980s and early 1990s. It has already occupied a place in the plastic pipe market and is recognized as a green product due to its excellent performance and wide application fields.

ERA Piping Systems, III PP Compression Fitting , PP Compression Socket , PTIII011 , WRAS System: Mechanical Compression Fitting (known as PP compression fittings) is a fitting that connect piping elements which require physical force to develop a seal or produce...nLightweight and high strength: PP pipes have a lower density and weigh only one-ninth of steel and one-eighth of copper, but their strength is relatively high, which makes PP pipes lighter during transportation and installation. Ability to withstand high work pressure at the same time

ERA Piping Systems, III PP Compression Fitting , PP Compression Reducing Socket , PTIII011 , WRAS System: Mechanical Compression Fitting (known as PP compression fittings) is a fitting that connect piping elements which require physical force to develop a seal or produce...nFeaturesn◇ Non-corrosive: PP pipes can withstand the corrosion of high-concentration acids and alkalis with a pH value ranging from 1 to 14 over a wide temperature range.n◇ Wear-resistant and non-scaling: The inner walls of PP pipes and fittings are uniform and smooth, with low flow resistance and no scaling.n◇ Reduce vibration and noise: PP pipe has excellent sound insulation properties and can significantly reduce vibration and noise caused by liquid flow.n◇ Anti-frost cracking: The excellent elasticity of PP material allows the cross-section of pipes and pipe fittings to expand with the frost-heaving liquid without cracking.n◇ Anti-condensation, less heat loss: PP material is a poor thermal conductor, which can reduce condensation and reduce heat loss.n◇ Simple installation: PP pipe is light in weight, easy to install and operate, and has weldability.n◇Long service life: The PP pipe system has a service life of 50 years under specified use conditions.

ERA Piping Systems, III PP Compression Fitting , PP Compression Female Thread Socket , PTIII008 , WRAS System: Mechanical Compression Fitting (known as PP compression fittings) is a fitting that connect piping elements which require physical force to develop a seal or produce...nWhat are the characteristics of pp pipen1. It has good tensile and compressive strength: but its flexibility is not as good as other plastic pipes.n2. Small fluid resistance: The pipe wall of PVC-U pipe is very smooth and has very little resistance to fluid. Its roughness coefficient is only 0.009. Its water transport capacity can be 20% higher than that of cast iron pipes of the same diameter and 40% higher than that of concrete pipes. %.

1.Adaptabilityn2.Trenchless Installationn3.HDPE pipe joined with heat fusion provides leak free connectionsnIn addition, the film form of HDPE has low permeability to water vapor and air, low water absorption, but relatively poor aging resistance, and its environmental stress cracking resistance is not as good as that of low-density polyethylene, especially when the performance drops significantly under thermal oxidation. .

1. The tensile strength, bending strength, bending modulus and pressure bearing capacity of chlorinated polyvinyl chloride pipe are higher than those of polyethylene pipe, polyvinyl chloride pipe and polypropylene pipe.n2. Chemical corrosion resistance, heat resistance and weather resistance are higher than PVC pipes.n3. The transportation of drinking water is not affected by chlorine in the water to ensure the quality of drinking water.n4. Good flame retardancy, no dripping during combustion, slow combustion and diffusion, no toxic gas.n5. Good flexibility, easy installation, can be connected with solvent.

1. CPVC power pipes are mainly made of PVC-C resin with excellent heat resistance and insulation performance. CPVC products are currently recognized as green and environment-friendly products, with smooth inner and outer wallsn2. CPVC power pipe can keep deformation under the environment above 93 ℃, and has sufficient strength.n3. Good insulation performancenCPVC power pipe can withstand high voltage above 30000 volts.n4. With different proportion of plasticizer, the hardness and softness can be easily adjusted