Bulk PVC end cap, adapter and bracket etc. fittings

Coupling

ERA Piping Systems, PP Thread Fitting , Coupling , PEX001, (ENISO1587AS/NZS4129) , Watermark & WRAS More related products of PP THREAD FITTINGS REDUCER ELBOW Production Process of PP THREAD FITTINGS REDUCER ELBOW Company Introduction of PP THREAD FITTINGS REDUCER ELBOW International...nPP pipe is a non-toxic, hygienic, high temperature resistant and recyclable pipe type. It is mainly used in indoor hot and cold water supply systems in buildings, and is also widely used in heating systems.nThe characteristics of PP pipes are non-corrosive, wear-resistant, non-scaling, reduced vibration and noise, and anti-freeze cracking (PP pipes will freeze and crack at low temperatures exceeding -20°C, and will decompose in high-temperature working environments as long as they exceed 70°C. Temperature between -20℃ to 70℃), anti-condensation, low heat loss, simple installation and long service life. There are three connection methods: welding method, edge welding method, and different material connecting method.

Send Inquiry

add to cart

PVC 90° ELBOW M/F

1. Light weight, convenient handling: small density, convenient handling, loading and construction.n2. Excellent corrosion resistance: It has excellent acid resistance, alkali resistance and corrosion resistance, and is very suitable for use in the chemical industry.n3. Low fluid resistance: the inner wall of the pipe is smooth, its roughness coefficient is only 0.009, and the fluid resistance is small, which effectively improves the hydraulic conditions of the pipe network and reduces the system operating costs.n4. High mechanical strength: the pipe has good pressure resistance, impact resistance and tensile strength.n5. Simple construction: the pipeline connection construction is fast and easy, and the construction cost is low.n6. Low cost: low price, convenient transportation and construction, long service life, so the overall cost is low.n7. No impact on water quality: It is confirmed by the dissolution test that it does not affect the water quality and is suitable for large-scale promotion and application.

Send Inquiry

add to cart

PVC VENT CAP

1. It has good tensile and compressive strengthn2. The wall of PVC pipe is very smooth and has little resistance to fluidn3. Excellent corrosion resistance: It has excellent acid resistance, alkali resistance and corrosion resistance, and is very suitable for use in the chemical industry.Low fluid resistance: the inner wall of the pipe is smooth, its roughness coefficient is only 0.009, and the fluid resistance is small, which effectively improves the hydraulic conditions of the pipe network and reduces the system operating costs.n4. The installation of PVC pipes, whether connected by bonding or rubber ring, has good water tightness.n5. PVC pipe is not a nutrient source, so it will not be eroded by rodents.n6. Performance test: curing time, shrinkage, splitting strength, tensile strength, peel strength, thermal stability, shelf life, release of harmful substances.bility, and can be used in different environments.

Send Inquiry

add to cart

PVC END CAP

1. PVC pipe has good tensile and compressive strengthn2. The wall of PVC pipe is very smooth, so the resistance of water flow is very small, and the water delivery effect is very good.n3. The corrosion resistance and drug resistance of PVC pipe are also very good, with good acid and alkali resistance characteristics. It is not affected by moisture and soil pH, and has a long service life.nThe pipes and pipe fittings can be connected by bonding. The construction method is simple, the operation is convenient, and the installation efficiency is high.The surface hardness and tensile strength of the pipe are excellent, and the safety factor of the pipe is high.

Send Inquiry

add to cart

PVC REDUCING Y TEE

1. PVC pipe has good tensile and compressive strengthn2. The wall of PVC pipe is very smooth, so the resistance of water flow is very small, and the water delivery effect is very good.n3. The corrosion resistance and drug resistance of PVC pipe are also very good, with good acid and alkali resistance characteristics. It is not affected by moisture and soil pH, and has a long service life.n4. PVC pipes also have good water tightness. This kind of pipes are connected by adhesive or rubber ringnCan maintain good water tightness.n5. Pvc pipe has good tensile and thermal stability, and can be used in different environments.

Send Inquiry

add to cart

PVC REDUCING TEE

The thermal conductivity and elastic modulus are small, and the frost resistance is better than that of cast iron drain pipes. The pipes and pipe fittings can be connected by bonding. The construction method is simple, the operation is convenient, and the installation efficiency is high. The pipeline has excellent corrosion resistance to inorganic acid, alkali and salt, and is suitable for industrial sewage discharge and transmission. The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to block, and the maintenance workload is small. The material has high oxygen index and self extinguishing property. The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the deformation affected by temperature is small.The thermal conductivity and elastic modulus are small, and the frost resistance is better than that of cast iron drain pipes. The pipes and pipe fittings can be connected by bonding. The construction method is simple, the operation is convenient, and the installation efficiency is high.

Send Inquiry

add to cart

PPR Fitting REDUCING TEE

1. Non toxic and hygienic. It is not only used for cold and hot water pipes, but also for purified drinking water systems.n2. Heat preservation and energy conservation.n3. Good heat resistance, which can meet the use requirements of hot water system in building water supply and drainage specifications.n4. Long service life.n5. It is easy to install and firmly connected.n6. The materials can be recycled. Does not affect product quality

Send Inquiry

add to cart

PVC PIPE SYSTEM DRAINAGE FITTINGS COUPLING

The surface hardness and tensile strength of the pipe are excellent, and the safety factor of the pipe is high. Good aging resistance, normal service life can reach more than 50 years. The pipeline has excellent corrosion resistance to inorganic acid, alkali and salt, and is suitable for industrial sewage discharge and transmission. The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to block, and the maintenance workload is small. The material has high oxygen index and self extinguishing property. The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the deformation affected by temperature is small. The thermal conductivity and elastic modulus are small, and the frost resistance is better than that of cast iron drain pipes. The pipes and pipe fittings can be connected by bonding. The construction method is simple, the operation is convenient, and the installation efficiency is high.

Send Inquiry

add to cart

PVC-U CONDUIT INSPECTION TEE

1. The inner and outer walls of the casing are smooth and the friction coefficient is small. It can reduce the resistance of wires and cables in the pipeline.n2. High compression resistance, it can be installed in the concrete in the open or concealed way, and will not be damaged under pressure. Medium and heavy pipe series are suitable for concealed laying in the concrete.n3. The casing has good impact resistance and heat resistance. During concrete pouring, the casing can withstand normal tamping impact without cracking, and will not soften and deform under the effect of concrete setting.n4. The casing has good moisture resistance, acid and alkali resistance, will not rust, and is acid, alkali and oil resistant. All joints shall be bonded with PVC adhesive according to the regulations, which can prevent water from seeping into the pipe and has better moisture-proof effect. Therefore, it is suitable for use in corrosive environment.

Send Inquiry

add to cart

PVC-U CONDUITS(medium Type)

1. The inner and outer walls of the casing are smooth and the friction coefficient is small. It can reduce the resistance of wires and cables in the pipeline.n2. High compression resistance, it can be installed in the concrete in the open or concealed way, and will not be damaged under pressure. Medium and heavy pipe series are suitable for concealed laying in the concrete.n3. The casing has good impact resistance and heat resistance. During concrete pouring, the casing can withstand normal tamping impact without cracking, and will not soften and deform under the effect of concrete setting.n4. The casing has good moisture resistance, acid and alkali resistance, will not rust, and is acid, alkali and oil resistant. All joints shall be bonded with PVC adhesive according to the regulations, which can prevent water from seeping into the pipe and has better moisture-proof effect. Therefore, it is suitable for use in corrosive environment.

Send Inquiry

add to cart

PVC INSULATING ELECTRICAL FITTINGS NORMAL BENDS-SLIP TYPE

1. Flame retardancy: PVC electrical sleeve can effectively eliminate the hidden danger of fire. The casing can extinguish automatically after leaving the open fire, and the fire will not spread with the pipeline.n2. Insulation: PVC pipe is mainly made of PVC, which is a good insulation material, so it can be used as electrical bushing to achieve good insulation performance.n3. It can withstand high voltage without breakdown, effectively avoiding metal and electric shock hazards.4. Bendability: 90 degree bending, cold forming can bend, can bend at any angle without bursting.n5.PVC has good flame retardancy and low heat transfer. It will extinguish automatically when it is out of fire, and the fire will not spread along the pipeline, so as to protect the safety of electricity.

Send Inquiry

add to cart

Reducing Socket

1.Adaptabilityn2.Trenchless Installationn3.HDPE pipe joined with heat fusion provides leak free connectionsnIn addition, the film form of HDPE has low permeability to water vapor and air, low water absorption, but relatively poor aging resistance, and its environmental stress cracking resistance is not as good as that of low-density polyethylene, especially when the performance drops significantly under thermal oxidation. .

Send Inquiry

add to cart

Plastic/PE/HDPE Butt Welding Fitting Reducing Tee

1.Adaptabilityn2.Trenchless Installationn3.HDPE pipe joined with heat fusion provides leak free connections

Send Inquiry

add to cart

90 Degree Elbow

1.Adaptabilityn2.Trenchless Installationn3.HDPE pipe joined with heat fusion provides leak free connections

Send Inquiry

add to cart

Flange

1.Adaptabilityn2.Trenchless Installationn3.HDPE pipe joined with heat fusion provides leak free connections

Send Inquiry

add to cart

PE/HDPE Socket Welding Fitting End Cap Factory Outlet

1.Adaptabilityn2.Trenchless Installationn3.HDPE pipe joined with heat fusion provides leak free connections.

Send Inquiry

add to cart

Tee

1.Adaptabilityn2.Trenchless Installationn3.HDPE pipe joined with heat fusion provides leak free connections.

Send Inquiry

add to cart

45 DEGREE ELBOW

1.Adaptabilityn2.Trenchless Installationn3.HDPE pipe joined with heat fusion provides leak free connections.

Send Inquiry

add to cart

Tapping Tee

HDPE Pipe Fitting System,Pipe and fittings shall be manufactured from virgin HDPE (High Density Polyethylene) compounds.n[Basic characteristics] High-density polyethylene is an opaque white waxy material with a specific gravity lighter than water, with a specific gravity of 0.941~0.960. It is soft and tough, but slightly harder than LDPE and slightly stretchable. It is non-toxic and tasteless.n[Combustion Characteristics] It is flammable and can continue to burn after leaving the fire. The upper end of the flame is yellow and the lower end is blue. It will melt when burning, with liquid dripping and no black smoke coming out. At the same time, it emits the smell of burning paraffin.n[Main advantages] Resistant to acids and alkalis, organic solvents, excellent electrical insulation, and can still maintain a certain degree of toughness at low temperatures. The surface hardness, tensile strength, rigidity and other mechanical strengths are higher than LDPE, close to PP, and tougher than PP, but the surface finish is not as good as PP.

Send Inquiry

add to cart

HDPE Electrofusion Tapping Tee For Water and Gas

HDPE Pipe Fitting System,Pipe and fittings shall be manufactured from virgin HDPE (High Density Polyethylene) compounds.nnHDPE is non-toxic, tasteless and odorless, with a density of 0.940~0.976g/cm3. It is a product of polymerization under low-pressure conditions catalyzed by Ziegler catalysts, so high-density polyethylene is also called low-pressure polyethylene.

Send Inquiry

add to cart

HDPE/PE Electrofusion Fittings For Water and Gas Branch Saddle

HDPE Pipe Fitting System,Pipe and fittings shall be manufactured from virgin HDPE (High Density Polyethylene) compounds.nAdvantages: HDPE is a highly crystalline, non-polar thermoplastic resin produced by copolymerization of ethylene. The appearance of original HDPE is milky white, and it is translucent to a certain extent in thin sections. It has excellent resistance to most domestic and industrial chemicals. It can resist the corrosion and dissolution of strong oxidants (concentrated nitric acid), acid and alkali salts, and organic solvents (carbon tetrachloride). The polymer is non-hygroscopic and has good waterproof vapor properties, and can be used for moisture-proof and seepage-proof purposes.

Send Inquiry

add to cart