1. Home
  2. Products
  3. Pressure Pipe And Fittings
  4. PVC pipes & thread fittings BS standard
  5. PVC FITTINGS REDUCER M/F
Categories
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F
PVC FITTINGS REDUCER M/F

PVC FITTINGS REDUCER M/F

TPF007
ERA Piping Systems, PVC Pipe Fitting, Reducer M/F,TPF007,BS STANDARD, CE System: PVC BS EN 10026-2 Pressure Pipe and Fitting System Thread PVC pipes and fittings for cold water Scope: This series of fittings can match the standard BS EN 10026-2 / BS-21.
1. The surface hardness and tensile strength of the pipe are excellent, and the pipeline safety factor is high. 2. It has good aging resistance and its normal service life can reach more than 50 years. 3. The pipeline has excellent corrosion resistance to inorganic acids, alkalis, and salts, and is suitable for industrial sewage discharge and transportation. 4. The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to be blocked, and the maintenance workload is small. 5. The material has a high oxygen index and is self-extinguishing. 6. The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the deformation affected by temperature is small. The thermal conductivity and elastic modulus are small, and compared with cast iron drainage pipes, they have excellent freezing resistance. 7. Bonding can be used to connect pipes and pipe fittings. The construction method is simple, the operation is convenient, and the installation efficiency is high. 8. Good water tightness: PVC-U pipes have good water tightness regardless of whether they are connected by bonding or rubber rings.

ERA Piping Systems, PVC Pipe Fitting, Reducer M/F,TPF007,BS STANDARD, CE

Scope:

PVC fittings are resistant to corrosion and chemical attack from most acids, alkalis, salts, fungi and bacteria. 

Threaded piping is commonly used in low-cost, noncritical applications such as domestic water, fire protection, and industrial cooling water systems.

Specification:

PVC(polyvinyl chloride) vinyl compounds.

Not for use with compressed air or gas 

Pvc fittins have proven superior performance in the industrial-piping, water-treatment, commercial-plumbing, irrigation and pool markets. 

Specification:

Model NumberTPF007MaterialPVC
DescriptionREDUCER M/FSize

3/4''x1/2''-4''x3''

StandardBS EN 10026-2/BS-21ColorWHITE
BrandERATemperature/
ConnectionBS THREADCertificate CE

System:

Thread PVC pipes and fittings for cold water

Our product line includes all common patterns including elbows, tees, couplings, bushings, unions and flanges.

BSPP male and BSPP female flat face swivel require a suitable soft washer between faces to seal.

Thread size refers to the nominal bore of the pipe.

Main Products:

Polyvinyl chloride (Polyvinyl chloride), English abbreviation PVC, is a polymer of vinyl chloride monomer (VCM) polymerized by peroxide, azo compound and other initiators or under the action of light and heat according to the mechanism of free radical polymerization. . Vinyl chloride homopolymers and vinyl chloride copolymers are collectively referred to as vinyl chloride resins.

PVC pipe product performance characteristics
1. Light weight, easy to transport and load and unload: PVC pipes are very light, easy to transport and construct, and can save labor.
2. Excellent chemical resistance: PVC pipe has excellent acid resistance, alkali resistance, and corrosion resistance, and is very suitable for use in the chemical industry.
3. Small fluid resistance: The wall surface of PVC pipe is smooth and has small resistance to fluid. Its roughness coefficient is only 0.009, which is lower than other pipes. Under the same flow rate, the pipe diameter can be reduced.
4. High mechanical strength: PVC pipes have very good water pressure resistance, external pressure resistance, impact resistance, etc., and are suitable for piping projects under various conditions.
5. Good electrical insulation; PVC pipes have excellent electrical insulation and are suitable for wires, cable conduits, and wire piping in buildings.
6. Does not affect water quality: PVC pipes have been proven by dissolution tests to not affect water quality and are currently the best pipe materials for tap water piping.
7. Simple construction; the joint construction of PVC pipes is quick and easy.

FAQ:
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services:
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.
7. You can also choose your own shipping forwarder.