1. Home
  2. Products
  3. Pressure Pipe And Fittings
  4. PVC Pressure Pipes and Fittings PN10 (DIN)
  5. PVC Fitting Male Adaptor Pn10
Categories
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10
PVC Fitting Male Adaptor Pn10

PVC Fitting Male Adaptor Pn10

US012
ERA Piping Systems ,PVC Pipe Fitting ,MALE ADAPTOR, US012, PN10(ISO1452),Socket, CE System: PVC-U (Unplasticised polyvinyl chloride) is one of the most popular thermoplastic materials used for pipework installations. Durapipe PVC-U is a solvent welded, fully matched pipework system

ERA Piping Systems ,PVC Pipe Fitting ,MALE ADAPTOR, US012, PN10(ISO1452),Socket, CE

Scope:

PVC-U fittings are manufactured in accordance with EN1452-3 and ISO161/1

PVC fittings Solvent cement Manifold fittings

Specification:

Tested and approved by the world’s premier certification institutes.

ERA fittings offer both high impact and high tensile strength.

Model NumberUS012MaterialPVC
DescriptionMALE ADAPTORSize20-160MM
StandardISO1452ColorWHITE BLACK GREY
BrandERATemperatureMax 60°C / 140°F
ConnectionSocket CertificateDVGW

Features:

Pressure ratings for plastic pipework systems are always quoted at 20 ° C, it is a fundamental principle of such systems that if the temperature is increased then the pressure rating must be reduced.  PVC-U systems should never be used for temperatures in excess of 60 ° C.  The following chart gives a rough guide as to the temperature/pressure relationship of PVC-U pipework systems.

PVC-U is resistant to most solutions of acids, alkalis, salts and solvents.

Fields of application:

Piping networks for irrigation, normal water transport for industry.

PVC fittings for pressure fluid applications.

Main Products:

Status Quo of PVC Pipe Industry

As one of the products of scientific and technological development, PVC pipes can be seen in daily life. In Europe, the growth rate of plastic pipes from 1980 to 1990 was 8%, and the output in 2001 reached 3.5 million tons, of which PVC pipes accounted for 60%. In 1985, the output of plastic pipes in the United States was 1.6 million tons, and in 1999, the output was about 3.6 million tons, of which PVC pipes accounted for 78%. The first UPVV flared pipe in China was born in Shenyang Plastic Factory in 1983. Since then, mainland China has the production capacity of PVC pipes and drainage pipes.

Advantage:
1. PVC pipe has good tensile and compressive strength.
2. The pipe wall of PVC pipe is very smooth, so the resistance to water flow is very small. Its water transport capacity is 20% higher than that of cast iron pipes of the same diameter, and the water transport effect is very high.
3. PVC pipes also have good corrosion resistance and chemical resistance. They have good acid resistance, alkali resistance, corrosion resistance, are not affected by moisture and soil pH, and have a long service life.
4. PVC pipes also have good water tightness. This type of pipe can maintain good water tightness regardless of whether it is connected by bonding or rubber rings.
5. PVC pipe has good stretchability and thermal stability, can adapt to different environments, and has a wide range of uses.
6. PVC pipe has good hardness, so it is used as a drainage pipe to prevent insect and ant erosion and has a longer service life.

FAQ:
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services:
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.
7. You can also choose your own shipping forwarder.