j-QR-code

Scan qrcode to view mobile website

  1. Home
  2. Products
  3. Pressure Pipe And Fittings
  4. PVC Pressure Pipes and Fittings PN16 (DIN8063)
  5. TRANSITION COUPLING
Categories
TRANSITION COUPLING
TRANSITION COUPLING
TRANSITION COUPLING
TRANSITION COUPLING
TRANSITION COUPLING
TRANSITION COUPLING
TRANSITION COUPLING
TRANSITION COUPLING
TRANSITION COUPLING
TRANSITION COUPLING
TRANSITION COUPLING
TRANSITION COUPLING
TRANSITION COUPLING

TRANSITION COUPLING

US6024
ERA PVC PN16 Pipe Fittings Skew Tee With DVGW Certificate elbow dimensions
1. It has good tensile and compressive strength: but its flexibility is not as good as other plastic pipes.
2. Small fluid resistance: The pipe wall of PVC-U pipe is very smooth and has very little resistance to fluid. Its roughness coefficient is only 0.009. Its water delivery capacity can be 20% higher than that of cast iron pipes of the same diameter and 40% higher than that of concrete pipes. %.
3. Excellent corrosion resistance and chemical resistance: PVC-U pipes have excellent acid resistance, alkali resistance, corrosion resistance, and are not affected by moisture and soil pH. No anti-corrosion treatment is required when laying pipes.
4. Good water tightness: The installation of PVC-U pipes, regardless of whether they are connected by bonding or rubber rings, has good water tightness.
5. Anti-gnawing: PVC-U pipe is not a nutrient source, so it will not be eroded by rodents. According to tests conducted by the American Sanitation Foundation in Michigan, rats will not bite PVCU pipes.
6. Performance test: Curing time, shrinkage rate, splitting strength, tensile properties, peel strength, thermal stability, applicable period, release of harmful substances during storage period.
​

ERA Piping Systems, PVC Pipe Fitting , Skew Tee, PN16(DIN8063) Socket, DVGW

Scope：
This series of fittings can match the standard DIN 8063. 
The piping network with normal material can be used around 20 to 30 years, but the PVC-U piping network can be used longer than 50 years.
The piping network has high tensile strength, not easy to break and safe in work.
Conveyance of water above ground for both outside and inside buildings.
This series of fittings specifies the characteristics of fittings made from PVC-U for piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure.
Water mains and services buried in the ground.
Buried and above ground drainage and sewerage under pressure.

Model NumberUS6024MaterialPVC
DescriptionTRANSITION COUPLINGSize25*3/4''--110*4''
StandardDIN8063ColorBLUE WHITE Grey
Working PressurePN16 16Bar,1.6MpaTemperatureMax 60°C / 140°F
ConnectionSOCKETCertificateCE DVGW
 
Main Products：
Features：
Perfect sealing under all conditions.
Light in weight, simple in connection and installation. 
Durability: extremely tough, suitable for long-term use.
Strong in acid and rust resistance, longer service life.
Tested and approved by the world’s premier certification institutes.
Strength: ERA fittings offer both high impact and high tensile strength.
Durability: extremely tough, suitable for long-term use.
Chemical resistance: PVC fittings are resistant to a wide range of chemicals. 

Fields of application：
Water supply in Building.
Governmental projects
Underground water distribution networks.
Infrastructure construction and building.
Drainage Installations between manholes.

FAQ：

1.What is your MOQ?

 Our MOQ is usually 5 CTNS.

2.What is your delievery time?

 The time of delievery is around 30-45days.

3.What is the shipping port?

 We ship the goods via Ningbo or Shanghai port.

4.What is your payment terms?

 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.

5.How should I contact you?

 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.

6.What is the location of your company?

Our company is located in the Taizhou Zhejiang Province,China.

If you would like to have a visit, you are much welcome.

7.How about the samples?

We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.

8.Why choose us?

1 Genuine produces with excellent quality and competitive price.

2 Cooperating with the customers all over the world and knowing the markets very well.

3 ERA is a listed company. Everything can be rest assured working with us.

4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services：
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.
7. You can also choose your own shipping forwarder.
Related Products
ASTM D2466 SCH40 Standard pvc pressure pipe Pn10

ASTM D2466 SCH40 Standard pvc pressure pipe Pn10

ERA Piping Systems, PVC Pressure Pipe, US001, PN10 (ISO1452), CE System: PVCPN10 (ISO1452) Pressure Pipe and Fitting System Scope: This series of fittings can match the standard ISO 1452. Specification: Pipe and fittings shall be manufactured from virgid PVC(polyvinyl chloride) vinyl compounds....
PVC Fitting 45° Elbow Pn10

PVC Fitting 45° Elbow Pn10

ERA Piping Systems ,PVC Pipe Fitting ,45°Elbow, USE01, PN10(ISO1452),Socket, CE System: The dimensions of our fittings comply with ISO1452 standards, while many of our products meet other standards as well, including British, ASTM and Thai. PVC is suitable for use at temperatures from 0ºC to 60ºC. The scope of application of the inner wire elbow of PVC water supply pipe fittings is very wide, covering the indoor water supply of civil buildings and industrial buildings, reclaimed water systems, residential quarters, buried water supply systems in factories, urban water supply pipeline systems, water treatment pipeline systems in water treatment plants, Garden irrigation, well drilling and other projects and other industrial pipes and other fields.
PVC Fitting Reducing Elbow Pn10

PVC Fitting Reducing Elbow Pn10

ERA Piping Systems ,PVC Pipe Fitting ,REDUCING ELBOW, USE07, PN10(ISO1452),Socket, CE System: PVC-U (Unplasticised polyvinyl chloride) is one of the most popular thermoplastic materials used for pipework installations. The main advantages of reducing elbows are as follows: 1. Connecting pipes of different sizes: The reducing elbow can smoothly connect pipes of different sizes, providing a fluid channel without resistance. 2. Reduce resistance loss: Compared with ordinary elbows, the use of reducing elbows can reduce pipeline resistance losses and make the flow more stable. 3. Uniform speed and pressure distribution: The internal design of the reducing elbow is reasonable, which makes the liquid distribution more uniform when passing through and reduces the generation of eddy current.
PVC Fitting 90° Elbow Pn10

PVC Fitting 90° Elbow Pn10

ERA Piping Systems ,PVC Pipe Fitting ,90°ELBOW, USE02, PN10(ISO1452),Socket, CE Scope: PVC-U MM sized fittings are available in sizes from 10mm to 500mm and in a choice of pressure ratings from 6 Bar to 16 bar. Manufactured in accordance with EN1452/2 and DIN 8063 all fittings are WRAS approved. PVC elbows have the following characteristics: 1. Light weight: PVC material is much lighter than ordinary metal pipes, making construction more convenient; 2. Heat insulation, moisture-proof and flame-retardant: PVC material is not easily affected by the external atmosphere and has good thermal insulation, moisture-proof and flame-retardant properties; 3. Acid and alkali resistance and corrosion resistance: PVC material has good acid and alkali resistance and corrosion resistance, and can be used to transport liquids with different PH values and various chemical properties; 4. Stability, good dielectric properties, durability and anti-aging: PVC material has good stability, high dielectric properties, strong durability and good anti-aging properties
PVC Fitting Reducing Elbow Pn16

PVC Fitting Reducing Elbow Pn16

ERA Piping Systems, PVC Pipe Fitting , REDUCING ELBOW, PN16(DIN8063) Socket, DVGW Specification: Pipe and fittings are applicable to components for the conveyance of water and waste water up to and including 45 °C. This part of ISO 1452 is applicable to the following types of fittings: -...
PVC Fitting Female Adaptor M/f Pn16

PVC Fitting Female Adaptor M/f Pn16

ERA Piping Systems, PVC Pipe Fitting , FEMALE ADAPTOR MF, PN16(DIN8063) Thread, DVGW Scope: Conveyance of water above ground for both outside and inside buildings. Specification: Pipe and fittings are applicable to PVCU fittings and to joints with components of PVCU, other plastics and...
PVC Swaged Hose Nipple

PVC Swaged Hose Nipple

PVC glue product is a new type of one component, fully transparent solution glue. It is a special fully transparent PVC plastic glue product developed for removing transparent or white PVC plastic products that are difficult to stick. It can be used in the problem of mutual adhesion or cross bonding between plastics and plastics, plastics and metals, plastics and nonmetals.The inner and outer walls of the product are smooth, the flow resistance is small, and the energy consumption of the fluid conveying system is small.
PVC Fitting Female Brass Tee

PVC Fitting Female Brass Tee

Convenient and reliable installation: notice hot melt connection is adopted, and a joint connection can be completed in a short time, which is convenient and time-saving. The inner and outer walls of the product are smooth, the flow resistance is small, and the energy consumption of the fluid conveying system is small. Strong heat resistance: the working temperature of the conveying water is 70 ℃ for long-term use and 95 ℃ for short-term use.
Contact Us
USEFUL RESOURCES
OUR PRODUCTS
Send Us A Message

(373639)