1. Home
  2. Products
  3. PVC Drainage Pipe And Fittings
  4. PVC DWV Drainage Fittings (AS/NZS 1260)
  5. PVC SNAP TEE
Categories
PVC SNAP TEE
PVC SNAP TEE
PVC SNAP TEE
PVC SNAP TEE
PVC SNAP TEE
PVC SNAP TEE
PVC SNAP TEE
PVC SNAP TEE
PVC SNAP TEE
PVC SNAP TEE
PVC SNAP TEE

PVC SNAP TEE

AUDT017
1. The surface tensile strength and hardness of the pipe are excellent, and the safety factor of the pipe is relatively high.
2. The anti-aging performance is good, and the service life of normal PVC drainage pipes can reach more than 50 years.
3. The pipeline has excellent corrosion resistance to inorganic acid, alkali and salt, so it is suitable for the transportation and discharge of industrial sewage.
4. The internal friction coefficient of the pipeline is small, the water flow is smooth, the blockage is not easy to occur, and the maintenance workload is small.
5. The oxygen index in the material is high, and the pipeline is self extinguishing.
6. The expansion coefficient of the pipeline is small, normally 0.07mm/℃, and the deformation is small due to temperature. At the same time, its thermal conductivity and elastic modulus are also small, and its frost resistance is better than that of cast iron drain pipes.
7. The connection between pipes and pipe fittings can be made by bonding, which is simple in construction, convenient in operation and efficient in installation.
8. Whether the PVC-U pipe is installed by bonding or rubber ring connection, the pipe has good water tightness.
PVC DWV FITTINGS AS/NZS1260
ERA Piping Systems, PVC DWV FITTINGS ,SNAP TEE, AUDT017, AS/NZS1260 , Watermark
System:PVC pipe system
Scope:Drainage pipe system can be used for road drains, agricultural, railway, airport, construction and public green. PVC has the smoothest flow surface of any piping material.The pipe will not be susceptible to blockages and will maintain a high flow capacity over the life of the pipeline.
Specification:A plastic sewer system costs less to operate and maintain because it has greater flow capacity per given size and fewer joints. The economic life cycle of a PVC sewer system is projected at more than 50 years.
Referenced Standards:AS/NZS 1260
Certificate:Watermark
Specification:
Model NumberAUDT017MaterialPVC
DescriptionSNAP TEE                    Size100MM               
StandardAS/NZS1260ColorWhite
BrandERATemperature        Max 60℃  / 140°F
ConnectionSocket CertificateWatermark
Main Products:
PVC drainage pipe features:
1. The surface hardness and tensile strength of the pipe are excellent, and the pipeline safety factor is high.
2. It has good aging resistance and its normal service life can reach more than 50 years.
3. The pipeline has excellent corrosion resistance to inorganic acids, alkalis, and salts, and is suitable for industrial sewage discharge and transportation.
4. The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to be blocked, and the maintenance workload is small.
5. The material has a high oxygen index and is self-extinguishing.
6. The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the deformation affected by temperature is small. The thermal conductivity and elastic modulus are small, and compared with cast iron drainage pipes, they have excellent freezing resistance.
7. Bonding can be used to connect pipes and pipe fittings. The construction method is simple, the operation is convenient, and the installation efficiency is high.
8. Good water tightness: PVC-U pipes have good water tightness regardless of whether they are connected by bonding or rubber rings.

The length of PVC drainage pipes is usually 4 meters, and there are strict regulations on the outer diameter of the project, which should be executed according to the standards. There are many specifications and models, with commonly used ones being 50,75110160. Outer diameter unit, millimeters.
The specifications of PVC drainage pipes should not only meet the standards, but also meet the performance indicators.
The appearance of PVC drainage pipes requires that the inner and outer walls be flat and smooth, without bubbles, cracks, depressions, horizontal lines, etc., with uniform color distribution, a tensile yield strength greater than 40 megapascals, a softening temperature above 80 degrees Celsius, and a drop hammer impact test result of less than 10%.

FAQ:
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services:
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.
7. You can also choose your own shipping forwarder.