ERA Piping Systems, PVC Pipe Fitting ,END PLUG, US4016, Schedule 40 (ASTM D2466) ,Slip, NSF-pw & UPC

System：

PVC Schedule 40 pipe and fittings exhibit consistent quality with uniform properties

Schedule 40 PVC is white in color and the pipes have the largest inner diameter of the three schedules.

SCH40 pressure fitting is easy to install and has better sound deadening qualities than PVC DWV fittings.

Scope：

All PVC Schedule 40 fittings shall meet, or exceed, the dimensional and tolerance requirements of ASTM D2466

Specification：

Solvent cement joints shall be made in a two-step process with primer manufactured for

thermoplastic piping systems and solvent cement conforming to ASTM D 2564.

Main Products：

The biggest difference between American standard pipe fittings and national standard pipe fittings is that the caliber American standard is the A series, which is often said in China. The national standard is the B series. It is 6MM, the American standard DN100 refers to the inch is 4'', the outer diameter is 114.3MM, the thickness is also 6MM, and the length of the elbow of the American standard is slightly longer than that of the national standard. It also means that the pipe fittings with the same nominal diameter (including elbows, tees, large and small heads, and pipe caps) have different diameters in the American standard and the national standard.

Advantages of PVC pipe fittings：
1. Aging resistance and long service life: Polyethylene pipes containing carbon black can be stored outdoors in the open air and will not be damaged by ultraviolet radiation. long lasting.
2. Good chemical corrosion resistance: It can withstand corrosion from a variety of media, and substances present in the soil will not degrade the pipeline. Polyethylene is an electrical insulator, so it will not rot, rust or electrochemical corrosion;
3. Good wear resistance: The wear resistance of this product is 4 times that of steel pipes. In the field of slurry transportation, compared with steel pipes, PVC pipes have better wear resistance, which means that PVC pipes have a longer service life and better economy.
4. Reliable connection: Polyethylene pipe systems are connected by electric heat fusion, and the strength of the joints is higher than the strength of the pipe body.
5. Good low-temperature impact resistance: Polyethylene has an extremely low low-temperature catalytic temperature and can be used safely in the temperature range of -60-60°C. During winter construction, pipe brittleness will not occur due to the good impact resistance of the material.