ERA Piping Systems, PVC Pipe Fitting ,Skew Tee, US4T03, Schedule 40 (ASTM D2466) , NSF-pw & UPC

System of PVC Fitting SCH40 Skew Tee：

SCH40 pressure fitting is easy to install and has better sound deadening qualities than PVC DWV fittings.

Installation requires the use of primer and solvent cement. For pressure applications, sharply angled pressure fittings must be used.

Scope of PVC Fitting SCH40 Skew Tee：

Never test with or transport/store compressed air or gas in PVC pipe or fittings. Doing so can result in explosive failures and cause severe injury or death.

Polyvinyl chloride (PVC) is one of the most broadly used thermoplastic materials, common to many industries.

Specification of PVC Fitting SCH40 Skew Tee：

This specification covers poly(vinyl chloride) (PVC) Schedule 40 pipe fittings made from four PVC plastic compounds and intended for use with Iron Pipe Size (IPS) outside-diameter plastic pipe.

Fittings fabricated by welding are not included in this specification. Included are requirements for materials, workmanship, dimensions, and burst pressure.

Main Products：

Product advantage：

1. Excellent surface hardness and tensile strength, high pipeline safety factor.

2. Good aging resistance, the normal service life can reach more than 50 years.

3. The pipeline has excellent corrosion resistance to inorganic acid, alkali and salt, which is suitable for industrial sewage discharge and transportation.

4. Small friction coefficient, smooth water flow, not easy to plug, less maintenance work.

5. The material has high oxygen index and self-extinguishing property.

6. The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the deformation affected by temperature is small. The thermal conductivity and elastic modulus are small, and the freezing resistance is better than that of cast iron drainpipe.

7. The connection of pipes and fittings can be bonded with simple construction method, convenient operation and high installation efficiency.

8. With good water tightness: the installation of PVC-U pipe has good water tightness, whether it is connected by adhesive or rubber ring.

A PVC SCH40 ASTM D2466 45-degree skew tee with NSF certificate is a specific type of PVC pipe fitting designed for use in pressurized water systems. Here's what each part of the description means:
PVC: Polyvinyl Chloride, a type of plastic commonly used in piping systems due to its durability, corrosion resistance, and affordability.
SCH40: A standard thickness classification for PVC pipes and fittings, indicating that the material meets the Schedule 40 requirements, which specifies the wall thickness and pressure rating of the pipe or fitting.
ASTM D2466: A specific ASTM (American Society for Testing and Materials) standard that sets the requirements for PVC pipe fittings, including dimensions, tolerances, and performance criteria.
45-degree skew tee: Describes the type and angle of the tee fitting. In this case, it's a tee fitting with a 45-degree angle, allowing for a change in direction of the flow.
NSF Certificate: Indicates that the product has been certified by NSF International, an independent organization that tests and certifies products for compliance with health and safety standards.
This type of fitting is commonly used in plumbing systems for residential, commercial, and industrial applications where a change in direction is needed in pressurized water lines. The NSF certification ensures that the fitting meets stringent standards for safety and performance in potable water applications