1. Home
  2. Products
  3. PVC Drainage Pipe And Fittings
  4. PVC DRAINAGE PIPES AND FITTINGS (BS1329/BS1401)
  5. PVC PAN ADAPTOR WITH RUBBER
Categories
PVC PAN ADAPTOR WITH RUBBER
PVC PAN ADAPTOR WITH RUBBER
PVC PAN ADAPTOR WITH RUBBER
PVC PAN ADAPTOR WITH RUBBER
PVC PAN ADAPTOR WITH RUBBER
PVC PAN ADAPTOR WITH RUBBER
PVC PAN ADAPTOR WITH RUBBER
PVC PAN ADAPTOR WITH RUBBER
PVC PAN ADAPTOR WITH RUBBER
PVC PAN ADAPTOR WITH RUBBER
PVC PAN ADAPTOR WITH RUBBER

PVC PAN ADAPTOR WITH RUBBER

UD025
The surface hardness and tensile strength of the pipe are excellent, and the safety factor of the pipe is high. Good aging resistance, normal service life can reach more than 50 years. The pipeline has excellent corrosion resistance to inorganic acid, alkali and salt, and is suitable for industrial sewage discharge and transmission. The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to block, and the maintenance workload is small. The material has high oxygen index and self extinguishing property. The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the deformation affected by temperature is small. The thermal conductivity and elastic modulus are small, and the frost resistance is better than that of cast iron drain pipes. The pipes and pipe fittings can be connected by bonding. The construction method is simple, the operation is convenient, and the installation efficiency is high.
PVC PIPES AND FITTINGS FOR DRAINAGE
PVC PIPE SYSTEM DRAINAGE PIPES DIN STANDARD BS1329 BS1401,  PAN ADAPTOR WITH RUBBER , UD025

System:PVC pipe system
Scope:Drainage pipe system can be used for road drains, agricultural, railway, airport, construction and public green. PVC has the smoothest flow surface of any piping material.The pipe will not be susceptible to blockages and will maintain a high flow capacity over the life of the pipeline.
Specification:A plastic sewer system costs less to operate and maintain because it has greater flow capacity per given size and fewer joints. The economic life cycle of a PVC sewer system is projected at more than 50 years.
Referenced Standards:BS1329/BS1401
Size:50mm – 250mm
Certificate:Kitemark
Specification:

Model NumberUD025MaterialPVC
Description           PAN ADAPTOR WITH RUBBERSize                      4''           
StandardBS1329、BS1401ColorWHITE、GREY
BrandERATemperature0-40
Connectionglue weldingCertificate    /
PVC PAN ADAPTOR WITH RUBBER
 
Main Products:
A plastic sewer system
 
When installing plastic drainage pipes, lead wire can be temporarily suspended for pre installation and adjustment of the swing opening
Coordinate, position, pipeline elevation, and slope shall comply with the design requirements for bonding, and timely correct the position of the swing joint coordinate, elevation, and slope. After bonding and curing, install and fix the support components, but do not clamp them too tightly. When using metal brackets,
Rubber gaskets must be placed in contact with the outer diameter of the pipe.
 
The main features of PVC drainage pipes are:
1. Lightweight: The specific gravity of the material is only 1/10 of cast iron, making transportation and installation easy, reducing costs. ​
2. Excellent chemical resistance: It has excellent acid and alkali resistance (except for strong acids and bases close to the saturation point or strong oxidizing chemicals). ​
3. Non-conductive: The material cannot conduct electricity and is not corroded by electrolysis and current. ​
4. It cannot burn and does not support combustion: there are no fire protection concerns. ​
5. Easy installation and low cost: cutting and connection are very simple, using PVC glue for connection, which is reliable and safe, easy to operate and low cost. ​
6. Durable: It has excellent weather resistance and cannot be corrupted by bacteria and fungi. ​
7. Small resistance and high circulation rate: the inner wall is smooth, the fluid fluidity loss is small, dirt is not easy to adhere to the smooth pipe wall, and maintenance is relatively simple and low-cost.
 
FAQ:
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services:
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.
7. You can also choose your own shipping forw