1. Home
  2. Products
  3. Pressure Pipe And Fittings
  4. PVC Pressure Fittings With Gasket
  5. PVC FITTINGS TWO FAUCET COUPLING
Categories
PVC FITTINGS TWO FAUCET COUPLING
PVC FITTINGS TWO FAUCET COUPLING
PVC FITTINGS TWO FAUCET COUPLING
PVC FITTINGS TWO FAUCET COUPLING
PVC FITTINGS TWO FAUCET COUPLING
PVC FITTINGS TWO FAUCET COUPLING
PVC FITTINGS TWO FAUCET COUPLING
PVC FITTINGS TWO FAUCET COUPLING
PVC FITTINGS TWO FAUCET COUPLING
PVC FITTINGS TWO FAUCET COUPLING
PVC FITTINGS TWO FAUCET COUPLING

PVC FITTINGS TWO FAUCET COUPLING

GP016
1. PVC pipe has good tensile and compressive strength
2. The wall of PVC pipe is very smooth, so the resistance of water flow is very small. Its water conveyance capacity is 20% higher than that of cast iron pipe with the same pipe diameter, and the water conveyance effect is very high.
3. The corrosion resistance and drug resistance of PVC pipe are also very good, with good acid, alkali and corrosion resistance. It is not affected by moisture and soil acidity and alkalinity, and has a long service life
Long life.
4. Pvc pipe also has good water tightness, which can maintain good water tightness whether the pipe is connected by adhesive or rubber ring.
5. Pvc pipe has good tensile and thermal stability, and can be used in different environments.
6. The hardness of PVC pipe is good, so it can be used as a drain pipe to prevent insect and ant erosion and has a longer service life.
PVC PRESSURE FITTINS WITH GASKET
ERA Piping Systems,PVC Pipe Fitting,TWO FAUCET COUPLING, GP016,Pressure with gasket(ISO 1452),CE

System:

PVC 1452 Pressure Pipe and Fitting with Gasket System

With High Performance Gasket.

Scope:

This series of fittings can match the standard ISO 1452

Gasketed pipe is required by many municipalities for public sewage systems,It is typically installed underground.

Specification:

Pipe and fittings shall be manufactured from virgid PVC(polyvinyl chloride) vinyl compounds.

The underside of the gasket is flat and butts up against the welding liner's flat face, while the top side has a rounded edge which fits nicely into the groove of the welding male. 

Fields of application:

Piping networks for water supply in building.

Piping networks for piping system in water treatment plant.

Piping networks for water farming.

Specification:
Model NumberGP016MaterialPVC
DescriptionPVC TWO FAUCET COUPLINGSize63-355MM
StandardISO 1452ColorLight Grey
Working PressurePN10 10Bar,1.0MpaTemperatureMax 60°C / 140°F
ConnectionGASKETCertificateCE
 
Main Products:
Pipe installation structure

PVC pipe has been regarded as the preferred pipe material by the construction industry. It is widely used in various fields and industries. From its own characteristics, it can be fully reflected in the waterway system. Then, what should we pay attention to during the installation process?

1. In order to ensure the safety and cleanliness of the PVC pipe, the pipe should be placed on the top with a bracket, which can ensure that the pipe is not placed anywhere and is not trampled by people, the pipe can also be used cleanly, and it can also prevent sludge residue in the pipe;

2. Before installation, the layout of the construction pipeline should be checked clearly, not only neat, but also strong in structure and smooth;

3. When installing, handle the pipe lightly to avoid damage during handling, and pay attention to the stones or silt staying in the pipe;

4. After the installation is completed, we need to conduct a pressure test for a period of time, and then check that there is no water leakage at each interface during the test, and replace it immediately if found.

The main features of PVC pipe include:
1. Light weight, easy to transport and install.
2. It has high corrosion resistance and is suitable for various water quality conditions.
3. Moisture-proof, no scaling, easy and convenient maintenance.
4. It is hygienic and non-toxic. It can be used in food and industrial fields. It is not easy to rust and age, and has a long service life. PVC pipes have excellent electrical insulation, do not change in volume after being exposed to light, and have good plasticity without impurities or bubbles during processing. The production defects are not easy to have the advantages of high impact resistance, anti-corrosion and wear resistance.
In addition, due to the low cost of PvC water pipes, it also provides the possibility for ordinary household users to use it. . These advantages make PVC pipes widely used in indoor heating pipes in building hot and cold water systems, central air-conditioning ventilation ducts, industrial water supply and other fields. They are also one of the water pipe materials in many buildings.

FAQ:
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services:
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.