1. Home
  2. Products
  3. Pressure Pipe And Fittings
  4. PVC Pressure Fittings With Gasket
  5. PVC FITTINGS THREE FAUCET REGULAR TEE
Categories
PVC FITTINGS THREE FAUCET REGULAR TEE
PVC FITTINGS THREE FAUCET REGULAR TEE
PVC FITTINGS THREE FAUCET REGULAR TEE
PVC FITTINGS THREE FAUCET REGULAR TEE
PVC FITTINGS THREE FAUCET REGULAR TEE
PVC FITTINGS THREE FAUCET REGULAR TEE
PVC FITTINGS THREE FAUCET REGULAR TEE
PVC FITTINGS THREE FAUCET REGULAR TEE
PVC FITTINGS THREE FAUCET REGULAR TEE
PVC FITTINGS THREE FAUCET REGULAR TEE
PVC FITTINGS THREE FAUCET REGULAR TEE

PVC FITTINGS THREE FAUCET REGULAR TEE

GP005
1. It has good tensile and compressive strength
2. The wall of PVC pipe is very smooth and has little resistance to fluid
3. PVC pipes have excellent acid resistance, alkali resistance and corrosion resistance, and are not affected by moisture and soil pH, so no anti-corrosion treatment is required when laying the pipes.
4. Good water tightness
5. PVC-U tube is not a nutrient source, so it will not be eroded by rodents.
6. Performance test: curing time, shrinkage, splitting strength, tensile strength, peel strength, thermal stability, shelf life, release of harmful substances.
PVC PRESSURE FITTINS WITH GASKET
ERA Piping systems,PVC Pipe Fitting,THREE FAUCET REGULAR TEE, GP005,Pressure with gasket(ISO 1452),CE

Rounded Edges to Minimize Stress Points

Scope:

Gasket lubricant or soap makes the fittings easier to slide together.

Specification:

Gaskets are matched to other DIN fittings based on the metric sizing

Machines & Moulds

ERA Co,Ltd has been equipped with sophisticated machines ( CPVC PIPE,  PE PIPE extrusion lines--Krauss-Maffei, Germany;

Injection machines-- HAITIAN )

Each year , about 1 million USD will be invested on new products' moulds to keep up with the market trend and industrial leading role.

Specification:
Model NumberGP005MaterialPVC
DescriptionPVC THREE FAUCET REGULAR TEESize63-355MM
StandardISO 1452ColorLight Grey
Working PressurePN10 10Bar,1.0MpaTemperatureMax 60°C / 140°F
ConnectionGASKETCertificateCE
 
Main Products:
PVC pipe (PVC-U pipe) Rigid polyvinyl chloride pipe is made of polyvinyl chloride resin combined with stabilizer, lubricant, etc. and then extruded by hot pressing method. It is the earliest plastic pipe that has been developed and applied. PVC-U pipe has strong corrosion resistance, easy bonding, low price and hard texture, but due to the exudation of PVC-U monomer and additives, it is only suitable for water supply systems with a conveying temperature not exceeding 45 °C. Plastic pipes are used for applications in conveying drinking water, wastewater, chemicals, heating and cooling fluids, food, ultrapure liquids, slurries, gases, compressed air and vacuum systems.

Advantages of pipe

1. It has good tensile and compressive strength: but its flexibility is not as good as other plastic pipes.

2. Low fluid resistance: the wall of PVC-U pipe is very smooth, and the resistance to fluid is very small. Its roughness coefficient is only 0.009, and its water transport capacity is 20% higher than that of cast iron pipe of the same diameter, and 40% higher than that of concrete pipe.

3. Excellent corrosion resistance and drug resistance: PVC-U pipe has excellent acid resistance, alkali resistance, corrosion resistance, is not affected by moisture and soil pH, and does not need any anti-corrosion treatment when the pipeline is laid.

4. With good water tightness: the installation of PVC-U pipe has good water tightness, whether it is connected by adhesive or rubber ring.

5. Rodent proof: PVC-U tubes are not nutrient sources, so they are not susceptible to rodent attack. Rats won't bite PVC-U pipe, according to a study conducted by the National Foundation for Health in Michigan.

6, performance test: curing time shrinkage splitting strength tensile property peeling strength thermal stability applicable period storage period harmful substance release.

FAQ:
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services:
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.