PVC FITTINGS THREE FAUCET REDUCING TEE

Model NO.: GP013

(4). The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to block, and the maintenance workload is small.
(5) The material has high oxygen index and self extinguishing property.
(6). The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the deformation affected by temperature is small. The thermal conductivity and elastic modulus are small, and the frost resistance is excellent compared with the cast iron drainage pipe.
(7). The pipes and pipe fittings can be connected by bonding. The construction method is simple, the operation is convenient, and the installation efficiency is high.
(8). Good water tightness: the installation of pvc-U pipe has good water tightness, whether by bonding or rubber ring connection.

Product Description

PVC PRESSURE FITTINS WITH GASKET
ERA Piping systems,PVC Pipe Fitting,THREE FAUCET REDUCING TEE, GP013，Pressure with gasket(ISO 1452),CE

System:

Generously Blended Branch Intersections

Heavy Duty Support at Branch Intersections.

Scope:

The pipe ends and fitting ends (street ell, bushing) are beveled to make it easier to insert into a gasketed hub.

Pipe joints have a bell. You should bevel every edge that you cut.

Specification:

The underside of the gasket is flat and butts up against the welding liner's flat face, while the top side has a rounded edge which fits nicely into the groove of the welding male.

The round nut then joins the liner and male compressing the gasket creating a tight seal.

Raw material

Raw material -- CPVC ( from JAPAN SEKISUI) , PPR (from Korea HYOSUNG), HDPE (from BOROUGE),

Also Domestic PVC material compounded by YONGGAO research institue ,which can pass NSF certificate.

Specification:

Model Number	GP013	Material	PVC
Description	PVC FITTINGS THREE FAUCET REDUCING TEE	Size	75x63-355x250MM
Standard	ISO 1452	Color	Light Grey
Working Pressure	PN10 10Bar,1.0Mpa	Temperature	Max 60°C / 140°F
Connection	GASKET	Certificate	CE

Main Products

Company introduction

Certificate exhibition

Downstream tee is a kind of pipe fitting in the drainage pipeline, which is used for the vertical connection of the branch pipe and the main pipe. Although it is a vertical connection, the connection where the branch pipe enters the main pipe is not vertically intersected, but is connected with a small arc along the flow direction of the water, so that the water in the branch pipe can flow smoothly to the main pipe. The commonly used pvc downstream tee, this small arc, plays a role in the downstream.

Hot Tags: PVC PRESSURE FITTINGS WITH GASKET THREE FAUCET REDUCING TEE, China, manufacturers, suppliers, factory