1. Home
  2. Products
  3. PVC Drainage Pipe And Fittings
  4. PVC DRAINAGE PIPES AND FITTINGS (BS1329/BS1401)
  5. PVC BALCONY DRAIN
Categories
PVC BALCONY DRAIN
PVC BALCONY DRAIN
PVC BALCONY DRAIN
PVC BALCONY DRAIN
PVC BALCONY DRAIN
PVC BALCONY DRAIN
PVC BALCONY DRAIN
PVC BALCONY DRAIN
PVC BALCONY DRAIN
PVC BALCONY DRAIN
PVC BALCONY DRAIN

PVC BALCONY DRAIN

UDD031
The surface hardness and tensile strength of the pipe are excellent, and the safety factor of the pipe is high. Good aging resistance, normal service life can reach more than 50 years. The pipeline has excellent corrosion resistance to inorganic acid, alkali and salt, and is suitable for industrial sewage discharge and transmission. The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to block, and the maintenance workload is small. The material has high oxygen index and self extinguishing property. The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the deformation affected by temperature is small. The thermal conductivity and elastic modulus are small, and the frost resistance is better than that of cast iron drain pipes. The pipes and pipe fittings can be connected by bonding. The construction method is simple, the operation is convenient, and the installation efficiency is high.
PVC PIPES AND FITTINGS FOR DRAINAGE fitting 
PVC PIPE SYSTEM DRAINAGE PIPES DIN STANDARD BS1329 BS1401, BALCONY DRAIN , UDD031

System:PVC pipe system
Scope:Drainage pipe system can be used for road drains, agricultural, railway, airport, construction and public green. PVC has the smoothest flow surface of any piping material.The pipe will not be susceptible to blockages and will maintain a high flow capacity over the life of the pipeline.
Specification:A plastic sewer system costs less to operate and maintain because it has greater flow capacity per given size and fewer joints. The economic life cycle of a PVC sewer system is projected at more than 50 years.
Referenced Standards:BS1329/BS1401
Size:50mm – 250mm
Certificate:Kitemark

Model NumberUDD031MaterialPVC
Description      BALCONY DRAIN   Size           110MM
StandardBS1329、BS1401ColorWHITE、GREY
BrandERATemperature0-40
Connectionglue weldingCertificate    /
Main Products:
 
Pipeline laying
1) The pipeline should be laid on the original soil foundation or on a backfill layer that meets the design requirements after excavation and backfilling treatment. For landfill test pipelines above the original ground level, the backfill treatment layer at the bottom of the pipeline must fall on the original soil layer that has reached the supporting capacity.
2) When laying pipelines, the pipes can be arranged along the direction of the pipeline at the edge of the trench and placed in sequence at the bottom of the trench. To reduce the amount of operation in the trench, the pipes connected by hot melt are connected to a certain length on the ground, and after being cured, they are lowered. After bonding and connecting to a certain length, they are lowered using the elastic laying method; Rubber ring flexible connections should be connected in grooves.
3) When laying pipes, the methods can be divided into manual laying and mechanical laying, centralized laying and dispersed laying, single section laying and combined laying, etc. The selection of pipe laying method can be determined based on conditions such as pipe diameter, pipe length and weight, pipe and interface strength, trench and site conditions, and the amount of mechanical equipment available. When lowering the pipe, careful operation should be carried out, and the lifting process should be slow and light. The pipe connected to the twist should be protected.
4) At the connection point of the pipeline constructed in the trench, an operation pit should be excavated for ease of operation. The size of the operation pit is specified in this standard for trench excavation.
5) When cutting plastic pipes during construction, the cutting surface should be straight. The socket end of the plug-in connector should be chamfered, and the thickness of the pipe end after chamfering should generally be 1/3 to 1/2 of the pipe wall thickness, with a chamfer of 15 ℃. After completion, the debris should be removed completely without leaving any burrs.
6) Pipes with rubber ring interfaces are allowed to be laid along curves, and the maximum deflection angle of each interface shall not exceed 2 °
7) After the installation of the pipeline, it should be anti-corrosion according to the design requirements. If there are no design requirements, refer to the anti-corrosion part of this process quality standard.
 
What material is the sewer pipe
Common sewer materials include PVC and stainless steel, among which PVC sewer pipes are more commonly used because these materials have relatively good tensile strength and hardness, and a higher safety factor when used. Moreover, the PVC material has good corrosion resistance and less friction resistance. As a sewer, it is not easy to block. The construction is also very simple, which can improve the installation efficiency of the pipeline. The pipeline has good aging resistance, and the service life is up to 50 years.
 
What to pay attention to when selecting PVC drainage pipes
1. When purchasing PVC drainage pipes, first smell if the pipes emit an unpleasant odor. If the smell produced by the pipes is very pungent, it indicates that their quality is not very good, and it is recommended not to purchase them.
2. When selecting, touch the surface of the drainage pipe with your hand. If the touch is very rough, the quality of the PVC drainage pipe is usually not up to standard. It is possible that various impurities were added to the PVC drainage pipe during production, resulting in poor quality.
3. When purchasing, it is also important to check the hardness of the PVC drainage pipe. You can pinch the PVC drainage pipe with your hand. If the PVC drainage pipe deforms, it indicates that the quality is not up to standard. High quality PVC drainage pipes will not deform no matter how they are pinched.
4. Check the elasticity of PVC drainage pipes. High quality PVC drainage pipes have good resilience. If the resilience of PVC drainage pipes is poor, they are prone to cracking because a large amount of calcium carbonate material is added during the production of such pipes, resulting in poor pipeline quality.
5. When making a purchase, you can take a small section of PVC pipe and then burn it over fire. High quality PVC pipes will not emit black smoke after being burned over fire. On the contrary, if black smoke is emitted after being burned over fire, you can also smell a pungent odor, indicating that recycled plastic or other impurities have been used as raw materials.
 
The Ministry of Industry and Information Technology and 10 other departments recently jointly issued the"Implementation Plan for High Quality Development of Green Building Materials Industry", focusing on enhancing the endogenous power, influence, growth power, and support of the entire green building materials industry chain, and launching a series of measures to promote the high-quality development of the green building materials industry.
The Implementation Plan proposes that by 2026, the annual operating revenue of green building materials will exceed 300 billion yuan, with an average annual growth rate of over 10% from 2024 to 2026. In recent years, the production scale of green building materials in China has been continuously expanding, the quality and efficiency have been continuously improving, and the promotion and application have been strengthened, gradually becoming a new driving force supporting the development of the building materials industry. The operating revenue of green building materials is expected to exceed 200 billion yuan in 2023, with a year-on-year increase of about 10%. There are over 100 industrial parks or clusters nationwide that mainly focus on building and sanitary ceramics, new building materials, and stone materials, and 9 national demonstration bases for new industrialization of green building materials have been cultivated. There are 12 pilot provinces for promoting green building materials to rural areas, and 48 cities have implemented policies to promote the improvement of building quality through government procurement support for green building materials. 58 green building material evaluation standards have been established for building doors and windows, sanitary ware, waterproof materials, and other products. By the end of 2023, the total number of green building material certification certificates exceeded 9500."The development potential of the green building materials industry is enormous, but it still faces problems such as the need to improve supply capacity, insufficient social influence and public recognition, insufficient engineering selection and market consumption motivation,"said Yan Xiaofeng, Secretary of the Party Committee and President of the China Building Materials Federation. The Implementation Plan proposes to promote production transformation and enhance industry endogenous power around the four dimensions of green building materials production, products, applications, and support; Implement the"Three Quality"action to enhance industrial influence; Accelerate application expansion and enhance industrial growth; Strengthening the industry foundation and enhancing industrial support are four key tasks. Promoting production transformation is the fundamental way to enhance the endogenous power of the green building materials industry. The relevant person in charge of the Raw Materials Industry Department of the Ministry of Industry and Information Technology introduced that the Implementation Plan should focus on promoting the following work: accelerating the greening of the production process, implementing technological transformation, and optimizing the energy consumption structure; Accelerate the intelligentization of production methods, accelerate the deep integration of the entire green building materials industry chain with the new generation of information technology; Promote the coordinated development of industries, accelerate the cultivation of green building materials industry clusters, and cultivate comprehensive green building materials enterprises with strong core competitiveness and significant driving effects. The implementation of the"three product"action of increasing variety, improving quality, and creating a brand is the only way to enhance the influence of the green building materials industry. The Implementation Plan proposes to carry out variety optimization and develop green building materials products for different application scenarios around the needs of low-carbon, zero carbon, and negative carbon projects, urban renewal and renovation, and green and low-carbon construction of rural houses; Promote the strengthening of quality foundation, promote the evaluation of quality management capabilities in enterprises, strengthen supervision and inspection of green building materials products and production enterprises, and promote the construction of a quality grading evaluation system for green building materials products; Expand brand influence, support regions with conditions to build first-class green building materials regional brands, encourage enterprises to increase brand construction investment, and cultivate trademark brands with distinctive characteristics, strong competitiveness, and good market reputation.
"We need to leverage policy synergy, strengthen organizational coordination, and promote the effective implementation of the 'Implementation Plan'. Yan Xiaofeng stated that we should fully leverage the bridging role of third-party organizations such as the China Building Materials Federation, actively carry out activities such as achievement exchange, brand evaluation, and product promotion, strengthen industry self-discipline, and do a good job in upstream and downstream docking.". Intensify the promotion of industrial policies, standards and norms for the high-quality development of green building materials, as well as typical experiences and successful cases of green building materials development in various regions and enterprises, create a good atmosphere, continuously promote the green and low-carbon transformation of production and lifestyle, and make the production and application of green building materials a conscious action of the whole society.
 
The 180 day growth plan for marketing talents through mentoring has been officially launched!
The launch ceremony of the 180 day growth plan for"mentoring"marketing talents, initiated by the General Manager's Office and organized by the Sales Center, was grandly held in the conference room on the fourth floor of the office building. The meeting was presided over by Zhou Daolin from the Sales Center, and was attended by Xu Jianhua, the General Manager of the company, Xu Jian, the Director of the Sales Center, Wang Shaochun, the Deputy Director, and 9 outstanding backbone talents selected from the first phase of the sales practical exercise, Special guest Liu Lingfeng attended this meeting.
01 Creating elites, passing down the torch from generation to generation

The overall work plan and deployment of the"180 day growth plan for marketing talents"by Xu Jian, the general manager of the sales center. Mr. Xu Jian provided a detailed explanation of the 6-month growth plan, promoting its implementation from multiple aspects such as system construction, market planning, and skill enhancement. He required the backbone participating in the growth plan to summarize on Monday, hold video conferences on Monday, conduct monthly reviews, and engage in practical activities, constantly reflecting and improving; He also said that the 9 seeded players in the practical exercises present here can be called the"Huangpu Phase I"of Chongqing AD, and the company has deep expectations for you; The fundamental purpose of formulating a growth plan is to strengthen the cultivation of backbone talents and create a leading figure in Chongqing's marketing talent; The company's sales leaders and elite sales managers will also share their years of sales experience without reservation in subsequent training courses, including theoretical knowledge, practical experience, excellent cases, etc., to pass on this skill.
02 Innovation model, diligent and pragmatic learning

General Manager Xu Jianhua delivered an important speech and announced the official launch of the"180 Day Growth Plan for Marketing Talents". Mr. Xu summarized the growth plan from three aspects: firstly, in terms of plan formulation, the"Chuan Gang Dai"marketing talent training model of Chongqing AD is an attempt by AD Group. The growth plan of seed players is a collection of valuable experience and wisdom from excellent sales CEOs and regional managers, and is the result of continuous analysis and discussion, It is currently the most reliable and effective execution plan for marketing talents in Chongqing; Secondly, in terms of program implementation, the training plan includes monthly training, practical coaching, retrospective summary, and stage evaluation, with a complete closed-loop training system that can promote the effective implementation and promotion of the 180 day growth plan; Thirdly, in terms of student learning, the 9 key members selected from the sales practice have a solid sales foundation, but they should also learn and deeply understand with an empty cup shape, cherish learning opportunities, and conscientiously implement relevant requirements. Mr. Xu emphasized that after the implementation of this growth plan, positive promotion opportunities will be given to each backbone based on their learning performance and assessment results, and the construction of the marketing team will be strengthened.
03 Ability model, self-assessment

The first phase of the 180 day growth plan for marketing talents through mentoring has officially launched. The 9 key talents participating in the training conducted self-evaluation and evaluation of their marketing ability models, comprehensively evaluating themselves from three aspects: thinking, knowledge, and skills, identifying their own positioning, and clarifying their strengths and weaknesses.
04 Empowerment training, thinking enhancement
Mr. Xu Jian and Mr. Liu Lingfeng conducted separate training sessions. Mr. Xu Jian conducted in-depth analysis of major competitors in the course of"Analysis of Core Needs of Competitors", analyzing their strengths and weaknesses, and proposing targeted breakthrough strategies based on his own experience, providing new strategic ideas for backbone students; Teacher Liu Lingfeng proposed the construction of a marketing system from planning, execution, to supporting the three links in the course of"Marketing Three Ring System Construction". He formulated clear operational plans, effectively implemented planning details, and improved relevant supporting resources, which became a strong support for the implementation of the company's marketing strategy.
05 on-site exam, summary and review
Nine key talents participated in the review exam and were divided into three groups, namely"Lingyun Team","Flying Tiger Team", and"Wolf Team". Each team conducted content discussions, analyzed three competitors and competitors, listed their weaknesses, and provided targeted advantage strategies based on the brand.
After the comparison information is listed, each team member takes the stage one by one to explain, randomly selects a competitor and provides a detailed description. Company leaders and consulting teachers listen throughout the process and provide feedback.
The 180 day growth plan for"mentoring"marketing talents has been officially launched, which means that the company will spare no effort in investing high-quality resources to help the backbone army move towards excellence and elites. At the same time, it will further improve and consolidate the overall strength of our marketing team, and strive tirelessly to become a creator of a happy life!
 
Plastic flexible oiling technology is an effective way to turn plastic waste into treasure
China is a major producer and consumer of plastic products, with a large amount of waste plastic generated every year. How to deal with white pollution from waste plastic has become a major challenge for the government. At a white pollution control symposium jointly organized by the Energy Utilization Research Group of the Development Research Center of the State Council, the Environmental Protection Industry Fund of the China Environmental Protection Federation, and the Ecological Environment Protection Industry Committee of the China Yellow River Cultural and Economic Development Research Association, experts stated that the flexible oiling technology of waste plastics developed by Beijing Fuhai Blue Sky Company is an effective way to solve white pollution and turn waste into treasure.
The website of the National Development and Reform Commission recently published an article stating that it is studying and formulating policy documents for the prevention and control of plastic waste pollution. Following the principle of"restricting one batch, replacing one batch, and regulating one batch,"policy measures will be proposed for waste products used in different production, daily life, and consumption, based on fields and materials. At the same time, a column titled"My Suggestions and Suggestions for the Prevention and Control of Plastic Waste Pollution"has been set up, hoping that people from all walks of life will provide opinions and suggestions on the management requirements of plastic products in different fields from January 5, 2018 to January 31, 2018. In this context, the above-mentioned institutions held a symposium on white pollution control in Beijing to explore solutions to waste plastics. Experts at the conference stated that the flexible oiling technology for waste plastics developed by Beijing Fuhai Blue Sky Company has high resource utilization efficiency and is pollution-free, making it an advanced technology for turning plastic waste into treasure.
At present, there are four main methods for the treatment of waste plastics in China: regeneration granulation, landfill, incineration power generation, and soil refining. These methods all have a commonality, as they produce a large amount of pollutants while dealing with plastic waste, and cannot fundamentally solve the pollution problem.
According to Li Yong, Chairman of Fuhai Blue Sky Company, their company's developed flexible oiling technology for waste plastics can fundamentally solve these problems. This technology not only successfully reduces waste plastics into oil products through environmentally friendly treatment, but also achieves an oil production rate of up to 80%, which is nearly 55 percentage points higher than traditional oil refining; Moreover, it produces almost no secondary pollution and can achieve continuous and large-scale operations. The primary oil produced can be of comparable quality to imported crude oil, and it does not contain sulfur. After refining, it becomes a good fuel oil.
Jin Yong, an academician of the CAE Member and president of the Institute of Chemical Science and Technology of Tsinghua University, has inspected this technology on the spot for many times. He said that he has seen many technologies for waste plastics treatment and transformation, and after comparison, he felt that"this technology is the most promising, not only leading in China, but also leading in the world. It can not only avoid secondary pollution, but also truly realize the high value-added of products. The social and economic benefits are very considerable."
Professor Dai Tiejun from the Institute of Circular Economy at Beijing Institute of Technology stated that this technology has three characteristics: first, new technologies for comprehensive resource utilization, second, high-quality utilization technologies, and third, full industry chain technologies
The flexible oiling technology of Fuhai Blue Sky garbage plastic was included in the advanced and applicable equipment for resource comprehensive utilization by the Ministry of Industry and Information Technology at the end of 2017, and has become one of the recommended technologies to the whole country. The company has also obtained the only legal license in the country for refining waste plastics using advanced technology.
Liu Xiangqun, Chairman of the China Renewable Resources Professional Committee, said that if this technology is implemented early, it will bring many benefits. Not only can it solve China's white pollution problem, but it is also equivalent to digging new oil wells, making contributions to solving China's oil shortage problem.
 
FAQ:
1.What is your MOQ?
Our MOQ is usually 5 CTNS.
2.What is your delievery time?
The time of delievery is around 30-45days.
3.What is the shipping port?
We ship the goods via Ningbo or Shanghai port.
4.What is your payment terms?
We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
5.How should I contact you?
You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services:
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.
7. You can also choose your own shipping forwarder.