ERA Piping Systems, PP Compression Fitting Valves & Filters , PP Compression Tank Connector , PTC01 , WRAS

System：
Mechanical Compression Fitting (known as PP compression fittings) is a fitting that connect piping elements which require physical force to develop a seal or produce alignment. 
They ensure a perfect seal in the construction of pressurized water distribution systems like sprinkler, garden and agricultural systems. 
We offer solutions for connecting PE pipes by Polypropylene (PP) Compression Fittings.
PP compression fittings are preferred because of their strength and durability. Compression fittings are leak proof. 

Irrigation,Drinking water supply,Treated water, House service connections,Compression Fittings are perfect solutions especially in wet environment when no electricity is available or in poor climatic conditions where in pipe-material is connected together in same form of a material-plastic. 

ERA PN16 PP Compression Reducing tee Plastic Fitting
PP compression fittings
ERA Mechanical Compression Fitting is a fitting that connect piping elements which require physical force to develop a seal or
produce alignment. There are several materials of compression fittings, such as: Steel, Brass, Plastic. The most plastic material
used is PP, there are also PE or PVC compression fittings.
PP compression fittings are widely used in water supply and irrigation. ERA mechanical fittings are made by high quality PP
material with UV protection, both material and fittings are approved use with drinking water. The threaded version is BSP.

Main Products：

Polypropylene (Polypropylene, referred to as PP, commonly known as Polypropylene soft adhesive).

It is made by polymerization of propylene. The molecular formula is:

Belongs to the crystalline polymer, has the characteristics of light, non-toxic, tasteless, but also has the characteristics of corrosion resistance, high temperature resistance, high mechanical strength. The polypropylene resin used for injection is white, waxy particles.

Polypropylene is easy to burn, the upper end of the flame is yellow, the lower end of the blue, a small amount of black smoke and melt dripping, after the fire

It burns and smells like oil.

Polypropylene is roughly divided into a single polypropylene homomers and improved impact performance of ethylene - propylene copolymers two. A total of

The impact resistance of polypolypropylene products is improved compared with that of homopolypropylene.

Main advantages of PP:

1. Due to the good fluidity at the melting temperature, the forming process is wider, and the anisotropy is smaller than PE, so it is especially suitable for the production of various shapes of simple products, products surface luster, dyeing effect, external scars and other aspects are better than PE material.

2. In general plastics, PP has good heat resistance. Its products can be boiled and disinfected at 100℃, suitable for tableware, kettles and other medical instruments that need to be sterilized at high temperature. The thermal deformation temperature is 100℃~105℃, which can be used for a long time above 100℃.

3. High yield strength and high bending fatigue life. Flexible hinges made of PP can withstand 70 million folds and bends without major damage if the thickness is appropriate (such as 0.25~0.5mm).