j-QR-code

Scan qrcode to view mobile website

  1. Home
  2. Products
  3. Pressure For Hot And Cold
  4. CPVC CTS Pipes & Fittings (ASTM 2846)
  5. FMALE ADAPTOR
Categories
FMALE ADAPTOR
FMALE ADAPTOR
FMALE ADAPTOR
FMALE ADAPTOR
FMALE ADAPTOR
FMALE ADAPTOR
FMALE ADAPTOR
FMALE ADAPTOR
FMALE ADAPTOR
FMALE ADAPTOR
FMALE ADAPTOR

FMALE ADAPTOR

CPA008
1. CPVC power pipes are mainly made of PVC-C resin with excellent heat resistance and insulation performance. CPVC products are currently recognized as green and environment-friendly products, with smooth inner and outer walls
2. CPVC power pipe can keep deformation under the environment above 93 ℃, and has sufficient strength.
3. Good insulation performance
CPVC power pipe can withstand high voltage above 30000 volts.
4. With different proportion of plasticizer, the hardness and softness can be easily adjusted
CPVC CTS PIPES AND FITTINGS
ERA Piping Systems, CPVC Pipe Fitting , FEMALE ADAPTOR，CPA008, CTS (ASTM 2846) , NSF-pw & UPC 

System：CPVC Copper Tube Size (CTS) Hot and Cold Domestic Water Distribution 

Used for potable hot and cold water distribution，with solvent weld joints, and is easy to install.

Scope：This specification covers Copper Tube Size (CTS) CPVC manufactured to standard dimensional ratio (SDR) 11 for hot and cold domestic water distribution. This system is intended for pressure applications where the operating temperature will not exceed 180°F at 100psi.

Specification：Pipe and fittings shall be manufactured from virgin rigid chlorinated poly(vinyl chloride).

It is lightweight, easy to assemble and install. Job-site erection of a leakproof joint can be made in only a minute with solvent cement, or by threading.Do not use with compressed air or other gases.

Model NumberCPA008MaterialCPVC
DescriptionFMALE ADAPTORSize1/2''-2''
StandardCTS / ASTM D2846ColorIvory color
BrandERATemperatureMax82.2°C / 180°F
ConnectionSocket or ThreadCertificateNSF、UPC
Main Products：

(1) CPVC feed pipe: Used in landscaping engineering, water engineering, paper factory, electrical engineering, brewing and fermentation factory, construction engineering, electroplating factory, sewer engineering, agricultural garden, telecommunications engineering, mining, drilling engineering, aquaculture, salt water engineering, highway engineering, natural gas engineering, golf course engineering, chemical factory, fishery with plastic raft.

(2) CPVC power tube: widely used in urban power grid construction and transformation; Urban municipal reconstruction project; Civil aviation airport engineering construction; Construction of engineering parks and residential areas; Traffic, road and bridge engineering construction city street lamp cable laying, and play a guiding and protective role.

FAQ：
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services：
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.
7. You can also choose your own shipping forwarder.
Related Products
ERA ASTM F439 full size CPVC Pressure pipes for hot and cold

ERA ASTM F439 full size CPVC Pressure pipes for hot and cold

From ERA brand in China, ASTM F439 can be applied to hot and cold water pipes in sizes from 1/2 "to 6". 1. Sturdy: Since PVC-C is stronger than PP-R, PB and PEX, it requires fewer hooks and brackets. PVC-C can withstand greater pressure. At the same flow rate, compared with PP-R, PB and PEX pipes, PVC-C pipes can use smaller diameters. 2. Easy to install: It can be connected using special fusing agent, and no special tools are needed during installation. It is suitable for both surface and concealed installation. 3. Corrosion resistance: PVC-C is not easily permeable to oxygen, so the metal parts in the system will not corrode due to oxidation. 4. Good flame retardancy: The oxygen index of PVC-C is 60, its combustion ability is very low, it extinguishes immediately after leaving the fire, will not produce fire droplets, and can suppress the generation of smoke and toxic gases. 5. Not affected by residual water: Unlike polyhydrocarbon pipes, PVC-C pipes are not affected by residual water and will not crack or collapse after long-term use. 6. Alkali resistance: PVC-C has strong anti-corrosion ability against both alkali and alkali, and can be used to transport HCL and NaOH liquids.
CPVC Fitting SCH80 45° Elbow

CPVC Fitting SCH80 45° Elbow

It is most suitable for anti-corrosion equipment. It is easy to process, cut, weld and bend. High strength, high stiffness and high hardness: good electrical insulation; good chemical stability; self extinguishing; low water absorption: easy to bond and paint.
CPVC Fitting SCH80 90° Elbow

CPVC Fitting SCH80 90° Elbow

horter lengths offer convenience to customers，Can withstand higher pressure，50 year warranty，Guaranteed quality and high brand awareness,It is most suitable for anti-corrosion equipment. It is easy to process, cut, weld and bend. High strength, high stiffness and high hardness: good electrical insulation; good chemical stability; self extinguishing; low water absorption: easy to bond and paint.
CPVC Fitting SCH80 Coupling

CPVC Fitting SCH80 Coupling

Product advantages: The valve body is light in weight, has strong corrosion resistance, has a compact and beautiful appearance, is light in weight and is easy to install, has strong corrosion resistance, has a wide range of applications, the material is hygienic and non-toxic, wear-resistant, easy to disassemble, and is simple and easy to maintain. . By introducing the raw material requirements, design requirements, manufacturing requirements, performance requirements, test methods, system application requirements and the relationship between operating pressure and temperature in the international standards for plastic PVC valve products and test methods, you can understand the needs for plastic PVC valves Basic quality control requirements such as sealing test, torque test and fatigue strength test.
FEMALE THREAD ELBOW

FEMALE THREAD ELBOW

1. High quality corrosion resistance. 2. Light weight, convenient transportation and installation. 3. The project construction is convenient and has obvious economic benefits. 4. The electric tube also has the advantages of strong compressive strength, high temperature resistance, long service life, etc., and basically has no thermal conductivity.
STRAIGHT TEE

STRAIGHT TEE

Full size, good quality and low price, can be applied to hot and cold water, high brand popularity, good quality, 50 years warranty.From ERA brand in China, ASTM F439 can be applied to hot and cold water pipes in sizes from 1/2''-6''. CPVC is a new engineering plastic with broad application prospects. The resin is produced by chlorination modification of polyvinyl chloride (PVC) resin and is a new type of engineering plastic. The product is white or light yellow, tasteless, odorless, non-toxic loose granules or powder.
COUPLING

COUPLING

1. Light weight, convenient transportation and installation. 2. The project construction is convenient and has obvious economic benefits. 3. High quality corrosion resistance. 4. The electric tube also has the advantages The quality is guaranteed, the good price is cheap, the brand is well-known, the warranty is 50 years, in the peer product has been in the leading positionf strong compressive strength, high temperature resistance, long service life, etc., and basically has no thermal conductivity.
FMALE ADAPTOR

FMALE ADAPTOR

The tensile strength, flexural strength, flexural modulus and bearing capacity of cpvc are higher than those of pvc. Chemical corrosion resistance, heat resistance and weather resistance are higher than PVC pipes. The transportation of drinking water is not affected by chlorine in the water to ensure the quality of drinking water. Good flame retardancy, no dripping during combustion, slow combustion and diffusion, no toxic gas. Good flexibility, easy installation, can be connected with solvent.
Contact Us
USEFUL RESOURCES
OUR PRODUCTS
Send Us A Message

(373639)