j-QR-code

Scan qrcode to view mobile website

  1. Home
  2. Products
  3. Pressure For Hot And Cold
  4. PPR Pipes And Fittings
  5. PPR II FEMALE THREAD TEE
Categories
PPR II FEMALE THREAD TEE
PPR II FEMALE THREAD TEE
PPR II FEMALE THREAD TEE
PPR II FEMALE THREAD TEE
PPR II FEMALE THREAD TEE
PPR II FEMALE THREAD TEE
PPR II FEMALE THREAD TEE
PPR II FEMALE THREAD TEE
PPR II FEMALE THREAD TEE
PPR II FEMALE THREAD TEE
PPR II FEMALE THREAD TEE

PPR II FEMALE THREAD TEE

PR029
1. Non toxic and hygienic. It is not only used for cold and hot water pipes, but also for purified drinking water systems.
2. Heat preservation and energy conservation.
3. Good heat resistance, which can meet the use requirements of hot water system in building water supply and drainage specifications.
4. Long service life.
5. It is easy to install and firmly connected.
Thermal insulation and energy conservation of ppr pipe: the thermal conductivity of ppr pipe is 0.21w/mk, and the ratio to steel pipe is 1/200, which shows that its thermal insulation and energy conservation effect is very good.
PPR DIN PIPES AND FITTINGS
ERA Piping Systems, PPR Pipe Fitting , II FEMALE THREAD TEE, PR029, (DIN8077/8088) , DVGW

System：ERA PPR pipes, due to its high impact strengh and light weight makes it most reliable and sophisticated system to be employed in plumbing applictions and  water supply(hot and cold).

Scope：
PPR pipes and fittings are suitable for hot and cold water transfer in buildings, underfloor and central heating systems. They can also be used for air ducts in industry and agriculture.

Specification：
Pipe and fittings shall be manufactured from 100% new PPR raw material from Korea.

These PPR systems have a high temperature and pressure resistance and are suitable for drinking water.

PPR pipe has a smooth inner surface, thus not letting any calcification to happen inside the pipe.

PPR has been designed and produced as a piping system for hot and cold water supply as well as for heating applications.

Specification：
Model NumberPR029MaterialPPR
DescriptionPPR II FEMALE THREAD TEESize20x1/2''、25x1/2''
StandardDIN8077/8088ColorGREEN、GREY
BrandERATemperatureMax 95°C / 203°F
ConnectionSocket CertificateDVGW
Main Products：
 
PPR advantages：
1, non-toxic, good health performance: heating PPR pipe after strict testing, fully meet the requirements of the national drinking water standards, can be used in drinking water and food industry pipeline system.

2, corrosion resistance, no scaling: PP-R pipe has good corrosion resistance, no scaling, no bacteria, can avoid pipe scaling blockage and basin, bathtub yellow rust worry.

3, the inner wall is smooth, the flow resistance is small: the inner wall of PP-R tube is smooth, the flow resistance is small, and the flow volume is large. Compared with the inner diameter metal, the flow volume can be increased by more than 30%.

4, high mechanical strength: heating PPR pipe toughness, impact resistance, high mechanical strength, especially in low temperature, high temperature environment selection is more suitable.

5, light weight, convenient installation, reliable.

6. High temperature resistance and good thermal insulation performance: softening temperature of PPR pipe for heating is 131. 5 degrees, allow in long-term continuous working pressure, can transport water temperature up to 95 degrees of hot water. This product also has good thermal insulation performance, thermal conductivity is about 1/200 of the metal tube, reducing the heat loss in the process of hot water transportation

FAQ：
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services：
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.
7. You can also choose your own shipping forwarder.
Related Products
ERA ASTM F439 full size CPVC Pressure pipes for hot and cold

ERA ASTM F439 full size CPVC Pressure pipes for hot and cold

From ERA brand in China, ASTM F439 can be applied to hot and cold water pipes in sizes from 1/2 "to 6". 1. Sturdy: Since PVC-C is stronger than PP-R, PB and PEX, it requires fewer hooks and brackets. PVC-C can withstand greater pressure. At the same flow rate, compared with PP-R, PB and PEX pipes, PVC-C pipes can use smaller diameters. 2. Easy to install: It can be connected using special fusing agent, and no special tools are needed during installation. It is suitable for both surface and concealed installation. 3. Corrosion resistance: PVC-C is not easily permeable to oxygen, so the metal parts in the system will not corrode due to oxidation. 4. Good flame retardancy: The oxygen index of PVC-C is 60, its combustion ability is very low, it extinguishes immediately after leaving the fire, will not produce fire droplets, and can suppress the generation of smoke and toxic gases. 5. Not affected by residual water: Unlike polyhydrocarbon pipes, PVC-C pipes are not affected by residual water and will not crack or collapse after long-term use. 6. Alkali resistance: PVC-C has strong anti-corrosion ability against both alkali and alkali, and can be used to transport HCL and NaOH liquids.
CPVC Fitting SCH80 45° Elbow

CPVC Fitting SCH80 45° Elbow

It is most suitable for anti-corrosion equipment. It is easy to process, cut, weld and bend. High strength, high stiffness and high hardness: good electrical insulation; good chemical stability; self extinguishing; low water absorption: easy to bond and paint.
CPVC Fitting SCH80 90° Elbow

CPVC Fitting SCH80 90° Elbow

horter lengths offer convenience to customers，Can withstand higher pressure，50 year warranty，Guaranteed quality and high brand awareness,It is most suitable for anti-corrosion equipment. It is easy to process, cut, weld and bend. High strength, high stiffness and high hardness: good electrical insulation; good chemical stability; self extinguishing; low water absorption: easy to bond and paint.
CPVC Fitting SCH80 Coupling

CPVC Fitting SCH80 Coupling

Product advantages: The valve body is light in weight, has strong corrosion resistance, has a compact and beautiful appearance, is light in weight and is easy to install, has strong corrosion resistance, has a wide range of applications, the material is hygienic and non-toxic, wear-resistant, easy to disassemble, and is simple and easy to maintain. . By introducing the raw material requirements, design requirements, manufacturing requirements, performance requirements, test methods, system application requirements and the relationship between operating pressure and temperature in the international standards for plastic PVC valve products and test methods, you can understand the needs for plastic PVC valves Basic quality control requirements such as sealing test, torque test and fatigue strength test.
FEMALE THREAD ELBOW

FEMALE THREAD ELBOW

1. High quality corrosion resistance. 2. Light weight, convenient transportation and installation. 3. The project construction is convenient and has obvious economic benefits. 4. The electric tube also has the advantages of strong compressive strength, high temperature resistance, long service life, etc., and basically has no thermal conductivity.
STRAIGHT TEE

STRAIGHT TEE

Full size, good quality and low price, can be applied to hot and cold water, high brand popularity, good quality, 50 years warranty.From ERA brand in China, ASTM F439 can be applied to hot and cold water pipes in sizes from 1/2''-6''. CPVC is a new engineering plastic with broad application prospects. The resin is produced by chlorination modification of polyvinyl chloride (PVC) resin and is a new type of engineering plastic. The product is white or light yellow, tasteless, odorless, non-toxic loose granules or powder.
COUPLING

COUPLING

1. Light weight, convenient transportation and installation. 2. The project construction is convenient and has obvious economic benefits. 3. High quality corrosion resistance. 4. The electric tube also has the advantages The quality is guaranteed, the good price is cheap, the brand is well-known, the warranty is 50 years, in the peer product has been in the leading positionf strong compressive strength, high temperature resistance, long service life, etc., and basically has no thermal conductivity.
FMALE ADAPTOR

FMALE ADAPTOR

The tensile strength, flexural strength, flexural modulus and bearing capacity of cpvc are higher than those of pvc. Chemical corrosion resistance, heat resistance and weather resistance are higher than PVC pipes. The transportation of drinking water is not affected by chlorine in the water to ensure the quality of drinking water. Good flame retardancy, no dripping during combustion, slow combustion and diffusion, no toxic gas. Good flexibility, easy installation, can be connected with solvent.
Contact Us
USEFUL RESOURCES
OUR PRODUCTS
Send Us A Message

(373639)