ERA Piping Systems, PVC Pipe Fitting, Brass Female Thread Reducing Tee F/F/F，TPF021，BS STANDARD, CE

Scope：
Suitable for temperatures from 0°C to 60°C.
PVC is non-toxic and taint free making this a suitable piping system for potable drinking water systems.
Commonly used in Pumping Systems for Dairy Sheds, domestic and industrial plumbing, Water Filtration Systems, Wastewater Applications and Irrigation Systems.
Referenced Standards：BS STANDARD
System：
PVC BS EN 10026-2 Pressure Pipe and Fitting System
PVC fittings have proven superior performance in the industrial-piping, water-treatment, commercial-plumbing, irrigation and pool markets.

Scope：
This series of fittings can match the standard BS EN 10026-2 / BS-21.
The elbow is used to join two standard BSP threaded fittings together, at an angle of 90°.

 

Main Products：

Broad market prospects

The global development trend of PVC industry chain is rapid, and the market prospect is broad. All countries in the world are interested in the development potential of PVC and its benefits to ecological environment protection. PVC is proving its function and influence to everyone with its excellent and distinctive characteristics. Power is irreplaceable by all other commodities. It is necessary for social and economic development, and it is necessary for ecological and environmental protection. It is the general trend of the development of social civilization.

Process conditions
Drying: Usually no drying is required.
Melting temperature: 185~205C.
Mold temperature: 20~50C.
Injection pressure: can be as high as 1500bar. Holding pressure: can be as high as 1000bar. Injection speed: In order to avoid material degradation, a relatively high injection speed is generally used.
Runners and Gates: All conventional gates can be used. If you are processing smaller parts, it is better to use a pinpoint gate or a submersible gate; for thicker parts, it is better to use a fan gate. The minimum diameter of the needle point gate or submersible gate should be 1mm; the thickness of the fan gate should not be less than 1mm.
Typical uses: water supply pipes, household pipes, house wall panels, commercial machine casings, electronic product packaging, medical equipment, food packaging, etc.
Material properties
ABS (acrylonitrile-butadiene-styrene copolymer)
ABS is used to transport drinking water, slurry and chemicals. Most commonly used for DWV (Drain Waste Vent) applications.
Unplasticized polyvinyl chloride (UPVC) and CPVC (post-chlorinated polyvinyl chloride)
UPVC has excellent chemical resistance throughout its entire operating temperature range and has a wide operating pressure band. Due to long-term high strength properties, stiffness and cost-effectiveness, UPVC systems account for a significant proportion of plastic pipe installations.
CPVC is resistant to a variety of acids, bases, salts, paraffins, halogens and alcohols. It is not resistant to solvents, aromatics and certain chlorinated hydrocarbons.
PP (polypropylene)
Polypropylene is suitable for use in food, drinking water and ultra-pure waters, as well as in the pharmaceutical, chemical and other industries.
PE (polyethylene)
Polyethylene has been used successfully for many years for the safe transportation of drinking water and wastewater, hazardous waste, and compressed gases.