Design and installation of underfloor heating pipes

2023-08-22

Laying PERT underfloor heating pipes: The underfloor heating pipes should be laid according to the pipe spacing and direction specified in the drawings. According to the on-site environment, spiral, circuitous, or mixed pipe layout should be adopted, and special clips should be used to fix the pipes on the underfloor heating extruded board, or other methods should be used to fix them. The distance between the fixed points of the heating pipes should be less than 500mm, the distance between the fixed points of the straight pipe section should be less than 250mm, and the bending radius of the underfloor heating coil pipe should be ≥ 6 times the outer diameter of the pipe, When the installation is interrupted or completed, the open area should be sealed in a timely manner, and the underfloor heating pipes buried in the filling layer should not.