1. Home
  2. Products
  3. Electric Conduits And Fittings
  4. PVC Insulating Electrical Pipes And Fittings (AS/NZS2053)
  5. PVC-U PLAIN REDUCER
Categories
PVC-U PLAIN REDUCER
PVC-U PLAIN REDUCER
PVC-U PLAIN REDUCER
PVC-U PLAIN REDUCER
PVC-U PLAIN REDUCER
PVC-U PLAIN REDUCER
PVC-U PLAIN REDUCER
PVC-U PLAIN REDUCER
PVC-U PLAIN REDUCER
PVC-U PLAIN REDUCER
PVC-U PLAIN REDUCER

PVC-U PLAIN REDUCER

AED036
1. PVC electrical tube and wire tube have strong resistance to pressure, PVC threading tube series can withstand strong pressure, can be laid in the concrete exposed or concealed, and is not afraid of cracking under pressure.
2. The wire tube is corrosion resistant, insect resistant, and PVC threading tube series has acid and alkali resistance. There is no plasticizer in the tube, so there is no pest.
3. The wire tube has good flame retardancy. After the PVC threading tube series is burned on the flame, it can self extinguish and prevent the fire from spreading.
4. The wire tube has strong insulation performance, can accept high voltage without being broken down, and can effectively prevent leakage and electric shock accidents.
5. The PVC electrical pipe is easy to construct, and the PVC threading pipe is light - only 1/5 of the steel pipe is easy to bend. Inserting a section of bending spring provided by us into the pipe can manually bend at room temperature.
6. The investment of wire tube can be saved. Compared with steel pipe, PVC wire tube can greatly reduce the data cost and construction and installation cost.
PVC-U INSULATING ELECTRICAL PIPE AND FITTINGS
ERA PVC-U INSULATING ELECTRICAL PIPE AND FITTINGS, PLAIN REDUCER, AED036,AS/NZS 2053,WATERMARK

Fusion Joints

Unlike the fusion process developed for other plastics pipes, the fusion process for HDPE is proven and has been used by the natural gas industry for over 40 years. Approximately 95% of all gas distribution piping in  the United States is polyethylene pipe joined by heat fusion.

Fusing HDPE pipe is not difficult and personnel can be trained in the process.

Adaptability

In addition to joining HDPE with heat fusion, HDPE pipe can also be joined with Stab or Mechanical Fittings.

There are a wide range of these fittings available, specific to your pipe size and application.

Specification:
Model NumberAED036MaterialPVC-U
DescriptionPVC-U PLAIN REDUCERSize25x20-50x40MM             
StandardISO3633ColorGrey
Working Pressure    /TemperatureMax 60°C / 140°F
ConnectionSocket & ThreadCertificateWATERMARK
 
Main Products:

1, excellent chemical corrosion resistance: PVC-U pipe has excellent acid and alkali resistance, corrosion resistance, for chemical industry, waste water discharge, health sewer and other purposes, more suitable. It can resist the corrosion of alkaline soil containing sulfate and carbonate. High impact strength: the hydraulic strength, external pressure strength and impact strength of PVC pipe are very high, which is suitable for pipe distribution engineering under various conditions. The construction is convenient, and the requirement of backfill is not high; In the municipal road engineering, it is not easy to deformation due to extrusion, and the comprehensive cost is low;

2, beautiful appearance and generous: UPVC drainage pipe appearance is white, bright and smooth, beautiful, bright color, can add a clean and light sense of The Times to the building indoor environment atmosphere. Simple construction: PVC pipe and pipe fittings using solvent adhesive connection, joint construction is quick and easy, construction cost is low.

3. Low comprehensive cost: 20-30% lower than the comprehensive cost of the cast iron piping system with the same specifications. Good environmental protection: PVC is an environmental protection product, can be recycled and reused, will not cause any pollution to the environment. Good sound insulation and noise reduction: with good noise reduction characteristics, can significantly reduce noise pollution. The silencing effect is more than 10dB. Smooth inner wall low fluid resistance: PVC-U pipe has smooth wall, low flow resistance, roughness coefficient 0.009, lower than other pipes, larger flow under the same diameter, and no scale attached, pipeline is not easy to block.

4. Long anti-aging service life: the elastic modulus of PVC-U pipe changes little with time, ensuring the long-term service performance of the pipe; Designed service life of more than 50 years; PVC-U strong resistance: it can effectively resist the penetration and penetration of plant roots.

FAQ:
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services:
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.