1. Home
  2. Products
  3. Electric Conduits And Fittings
  4. PVC Insulating Electrical Pipes And Fittings (AS/NZS2053)
  5. PVC-U CONDUIT JUNCTION BOX 1 WAY
Categories
PVC-U CONDUIT JUNCTION BOX 1 WAY
PVC-U CONDUIT JUNCTION BOX 1 WAY
PVC-U CONDUIT JUNCTION BOX 1 WAY
PVC-U CONDUIT JUNCTION BOX 1 WAY
PVC-U CONDUIT JUNCTION BOX 1 WAY
PVC-U CONDUIT JUNCTION BOX 1 WAY
PVC-U CONDUIT JUNCTION BOX 1 WAY
PVC-U CONDUIT JUNCTION BOX 1 WAY
PVC-U CONDUIT JUNCTION BOX 1 WAY
PVC-U CONDUIT JUNCTION BOX 1 WAY
PVC-U CONDUIT JUNCTION BOX 1 WAY

PVC-U CONDUIT JUNCTION BOX 1 WAY

AED003
1. The inner and outer walls of the casing are smooth and the friction coefficient is small. It can reduce the resistance of wires and cables in the pipeline.
2. High compression resistance, it can be installed in the concrete in the open or concealed way, and will not be damaged under pressure. Medium and heavy pipe series are suitable for concealed laying in the concrete.
3. The casing has good impact resistance and heat resistance. During concrete pouring, the casing can withstand normal tamping impact without cracking, and will not soften and deform under the effect of concrete setting.
4. The casing has good moisture resistance, acid and alkali resistance, will not rust, and is acid, alkali and oil resistant. All joints shall be bonded with PVC adhesive according to the regulations, which can prevent water from seeping into the pipe and has better moisture-proof effect. Therefore, it is suitable for use in corrosive environment.
5. PVC has strong compression resistance, and can be installed in the concrete in an open or concealed manner, without being damaged by external pressure.
6. PVC electrical casing is light in weight, convenient in handling and construction, which can save a lot of labor and material resources.
PVC-U INSULATING ELECTRICAL PIPE AND FITTINGS
ERA PVC-U INSULATING ELECTRICAL PIPE AND FITTINGS, CONDUIT JUNCTION BOX 1 WAY, AED003,AS/NZS 2053,WATERMARK

Fusion Joints

HDPE piping systems can be joined with heat fusion welds. Heat fusion involves the heating of two HDPE surfaces then bringing them together to form a permanent, monolithic, leak-free system.

Unlike the fusion process developed for other plastics pipes, the fusion process for HDPE is proven and has been used by the natural gas industry for over 40 years. Approximately 95% of all gas distribution piping in  the United States is polyethylene pipe joined by heat fusion.

Fusing HDPE pipe is not difficult and personnel can be trained in the process.

Adaptability

In addition to joining HDPE with heat fusion, HDPE pipe can also be joined with Stab or Mechanical Fittings.

There are a wide range of these fittings available, specific to your pipe size and application.

Specification:
Model NumberAED003MaterialPVC-U
DescriptionPVC-U CONDUIT JUNCTION BOX 1 WAYSize20、25MM
StandardISO3633ColorGrey
Working Pressure    /TemperatureMax 60°C / 140°F
ConnectionSocket & ThreadCertificateWATERMARK
 
 
Main Products:
 
HDPE, short for High Density Polyethylene, is a polymer compound material. It is a polymer made from ethylene through polymerization reaction. Its molecular chain structure is linear, its molecular weight is large, and its density is as high as 0.941-0.965g/cm3. Because of its excellent physical and chemical properties, HDPE has a wide range of applications in various fields.
 
What are the uses of hdpe material
1. Plastic bags: HDPE is one of the most commonly used raw materials for manufacturing plastic bags. It has the characteristics of high strength, water resistance, corrosion resistance, not easy to break and so on. It is widely used in food, medicine, cosmetics, clothing, shoes and hats and other industries.
2, plastic bottles: HDPE material transparency is higher, has good mechanical strength and chemical corrosion resistance, so it is often used to manufacture beverage bottles, cleaning supplies bottles, cosmetic bottles, etc.
3, pipeline: HDPE material pipeline has good flexibility and corrosion resistance, can be widely used to transport tap water, natural gas, petroleum, chemical and other fields.Anticorrosion, etc.
4, film material: HDPE film has excellent waterproof performance, can be used for underground tunnels, DAMS, reservoirs and other projects in seepage prevention, leakage prevention,Field.
5, polyethylene foam: HDPE material foam has good thermal insulation and compressive performance, widely used in construction, transportation, furniture and so on
 
FAQ:
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services:
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.