j-QR-code

Scan qrcode to view mobile website

  1. Home
  2. Products
  3. Pressure Pipe And Fittings
  4. PVC Pressure Pipes and Fittings PN16 (DIN8063)
  5. PVC Fitting Female Tee Pn16
Categories
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16
PVC Fitting Female Tee Pn16

PVC Fitting Female Tee Pn16

US6T03
ERA Piping Systems, PVC Pipe Fitting , FEMALE TEE, PN16(DIN8063) Thread, DVGW Specification: This part of ISO 1452 is also applicable to PVC-U flange adapters and to the corresponding flanges made from various materials.
(1) The surface hardness and tensile strength of the pipe are excellent, and the pipeline safety factor is high.
(2) It has good aging resistance and its normal service life can reach more than 50 years.
(3) The pipeline has excellent corrosion resistance to inorganic acids, alkalis, and salts, and is suitable for industrial sewage discharge and transportation.
(4) The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to be blocked, and the maintenance workload is small.
(5) The material has a high oxygen index and is self-extinguishing.
(6) The linear expansion coefficient of the pipeline is small, 0.07mm/℃, and the deformation affected by temperature is small. The thermal conductivity and elastic modulus are small, and compared with cast iron drainage pipes, they have excellent freezing resistance.
(7) Bonding can be used to connect pipes and pipe fittings. The construction method is simple, the operation is convenient, and the installation efficiency is high.
(8) Good water tightness: The installation of PVC-U pipes, whether bonded or rubber ring connected, has good water tightness.

ERA Piping Systems, PVC Pipe Fitting , FEMALE TEE, PN16(DIN8063) Thread, DVGW

Specification：This part of ISO 1452 is also applicable to PVC-U flange adapters and to the corresponding flanges made from various materials.

Pipe and fittings are applicable to PVCU fittings and to joints with components of PVCU, other plastics and non-plastics materials intended to be used for conveyance of water above ground for both outside and inside buildings.

System：EN ISO 1452 Plastics piping systems for water supply and for buried and above drainage and sewerage under pressure.

ISO 1452-3:2009 specifies the characteristics of fittings made from unplasticized poly(vinyl chloride) (PVCU) for piping systems intended for water supply and for buried and above ground drainage and sewerage under pressure. It also specifies the test parameters for the test methods referred to.

Model NumberUS6T03MaterialPVC
Description       FEMALE TEEStandardDIN8063
TemperatureMax 60°C /140°FWorking Pressure
PN16，16Bar，
1.6Mpa
Size20*1/2''-110*4''CertificateCE DVGW
ConnectionsocketColor
white grey BLUE
Industrial Status：

NO.1 in Export: The largest export scale for independent brand

Most certificates: Products are certified among over 100 nations in Europe and America.

Rich in DIfferent series products and standards: DIN, ASTM , AS/NZS, etc.

Most trademark registration

Features：

Perfect sealing under all conditions.

Light in weight, simple in connection and installation. 

Fields of application：

Pressurized water distribution networks.

Governmental projects

Infrastructure construction and building.

Main Products：
FAQ：
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Our Services：
1. Any inquiries will be replied within 24 hours
2. Professional manufacturer.
3. OEM is available.
4. High quality, standard designs, reasonable&competitive price, fast lead time.
5. Faster delivery: Sample will be prepared in 2-3days.
6. Shipping: We have strong cooperation with DHL, TNT, UPS, MSK, China Shipping, etc.
7. You can also choose your own shipping forwarder.
Related Products
PVC UPVC PN16 DIN8063 STANDARD HIGH PRESSURE PIPES FOR WATER SUPPLY WITH DVGW

PVC UPVC PN16 DIN8063 STANDARD HIGH PRESSURE PIPES FOR WATER SUPPLY WITH DVGW

ERA Piping Systems, PVC Pipe Fitting PIPES, PN16(DIN8063) Socket, DVGW Company Profile EN ISO 1452 Plastics piping systems is applicable to fittings in piping systems intended for the supply of water under pressure up to and including 25 °C (cold water), intended for human consumption and for...
PVC Fitting 45° Elbow Pn16

PVC Fitting 45° Elbow Pn16

ERA Piping Systems, PVC Pipe Fitting ,45°Elbow, PN16(DIN8063) Socket, DVGW System: EN ISO 1452 Plastics piping systems is applicable to fittings in piping systems intended for the supply of water under pressure up to and including 25 °C (cold water), intended for human consumption. HDPE has good heat resistance and cold resistance, good chemical stability, high rigidity and toughness, and good mechanical strength. The dielectric properties and environmental stress cracking resistance are also good.
PVC Fitting Reducing Elbow Pn16

PVC Fitting Reducing Elbow Pn16

ERA Piping Systems, PVC Pipe Fitting , REDUCING ELBOW, PN16(DIN8063) Socket, DVGW Specification: Pipe and fittings are applicable to components for the conveyance of water and waste water up to and including 45 °C. This part of ISO 1452 is applicable to the following types of fittings: -...
PVC Fitting 90° Elbow Pn16

PVC Fitting 90° Elbow Pn16

ERA Piping Systems, PVC Pipe Fitting ,90°Elbow, PN16(DIN8063) Socket, DVGW System: Plastic piping systems used for the supply of water under pressure up to and including 25 °C, used for human consumption and for general purposes as well as for drainage and sewerage water under pressure. Some of the most important properties of PVC are: • Density. PVC is dense compared to other plastics. • low cost. PVC is readily available and inexpensive. • Rigidity. Rigid PVC ranks among the best in terms of stiffness and durability. • strength. Rigid PVC has excellent tensile strength, which means it takes a lot of force to stretch and break.
PVC Fitting Female Adaptor M/f Pn16

PVC Fitting Female Adaptor M/f Pn16

ERA Piping Systems, PVC Pipe Fitting , FEMALE ADAPTOR MF, PN16(DIN8063) Thread, DVGW System: EN ISO 1452 Plastics piping systems is applicable to fittings in piping systems intended for the supply of water under pressure up to and including 25 °C (cold water). How is PVC used in construction? PVC is used in pipes, flooring, siding and windows. Pipes are usually leak-free because the plastic does not break or crack easily. Since it is not easy to corrode, it can be used indoors and outdoors. Flexible PVC is used to make flooring such as vinyl tile and plank flooring, as well as wall coverings and wire and cable insulation. It is used in many industries such as healthcare and education because it is waterproof and easy to walk on. Window frames and siding are also made from uPVC, helping consumers save energy. For example, vinyl window frames have three times the insulating properties of aluminum windows.
PVC Fitting Tee Pn16

PVC Fitting Tee Pn16

ERA Piping Systems, PVC Pipe Fitting , STRAIGHT TEE, PN16(DIN8063) Socket, DVGW Research Institute 1. CNAS ISO 17025 ACCREDITED LAB, be able to issue test report on Chinese standard with CANAS. 2. IAPMO RESEARCH AND TEST ,INC. ACCREDITED LAB , accredited to issue test reports on Standards Advantages of using PVC PVC is both durable and versatile, offering many advantages when it comes to plumbing. 1. Sturdy and durable. Compared to cast iron pipes, recyclable PVC pipes are less likely to crack or break. It can also last at least 50 years. 2. Economical and affordable. Compared to materials like wood or copper, PVC is cost-effective, giving you the best value for your money. 3. Light. PVC materials are lighter than other building materials, so shipping costs are lower. 4. Fireproof. PVC plastic's high chlorine and low oxygen content make it fire-resistant. 5. Resistant to chemical corrosion. PVC rarely reacts when in contact with other substances such as oils, mineral acids, fats, salts, alkalis, and alcohols. 6. Versatile. PVC can be molded into a variety of shapes and forms and can also be integrated into fabrics for increased durability.
PVC Fitting Female Elbow Pn16

PVC Fitting Female Elbow Pn16

ERA Piping Systems, PVC Pipe Fitting ,Female Elbow, PN16(DIN8063) Thread, DVGW Scope: This series of fittings specifies the characteristics of fittings made from PVC-U for piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure. PVC form PVC comes in two forms: rigid PVC or RPVC, and unplasticized PVC or uPVC. Rigid versions are used for pipes, wiring insulation, clothing, etc. Although it is not flexible, it is strong and durable. It is one of the most commonly used pipe materials in the United States. CPVC is a type of water pipe that is made by adding chlorine to RPVC. CPVC is fire resistant and is commonly used in sprinkler systems and drinking water pipes. uPVC, or unplasticized PVC, is used for window frames and siding. It is rigid and often used to replace wood in construction applications. uPVC is also used for pipes and remains most popular outside the United States. It can be used in place of cast iron for heavy duty plumbing pipes.
PVC Fitting Female Adaptor M/f Pn16

PVC Fitting Female Adaptor M/f Pn16

ERA Piping Systems, PVC Pipe Fitting , FEMALE ADAPTOR MF, PN16(DIN8063) Thread, DVGW Scope: Conveyance of water above ground for both outside and inside buildings. Specification: Pipe and fittings are applicable to PVCU fittings and to joints with components of PVCU, other plastics and...
Contact Us
USEFUL RESOURCES
OUR PRODUCTS
Send Us A Message

(373639)