As/nzs1260/floor Waste Gully

As/nzs1260/floor Waste Gully

ERA Piping Systems, PVC DWV Pipe Fitting, AS/NZS1260/ FLOOR WASTE GULLY, AUDS01,WATERMARK Raw material Raw material -- CPVC ( from JAPAN SEKISUI) , PPR (from Korea HYOSUNG), HDPE (from BOROUGE), Also Domestic PVC material compounded by YONGGAO research institue ,which can pass NSF certificate....

Send InquiryChat Now
Product Details

ERA Piping Systems, PVC DWV Pipe Fitting,  AS/NZS1260/  FLOOR WASTE GULLY, AUDS01,WATERMARK

图片19.png

Raw material

Raw material -- CPVC ( from JAPAN SEKISUI) , PPR (from Korea HYOSUNG), HDPE (from BOROUGE), 

Also Domestic PVC material compounded by YONGGAO research institue ,which can pass NSF certificate.

System:   

PVC-U is the predominant material used in DWV applications in Australia.

The very smooth bore and chemical resistance characteristics of PVC ensure no scale or built up corrosion, thus producing a high flow capacity.

Scope: 

SN4 and SN6 are considered to be suitable for plumbing and domestic drainage applications and SN8 and SN10 are suitable for municipal drainage applications or other applications where higher stiffness may be required

The fittings are designed with high impact strength, which helps to prevent damage during handling and installation.

Specification: 

DWV pipes up to 80mm are specified in terms of their dimensions and have a specified minimum wall thickness. As well as dimensions to ensure compatibilty of joints, DWV pipes 100mm and above are specified in terms of minimum ring bending stiffness as measured in a standard test and designated by an ‘SN’ classification.

DWV Solvent Weld fittings are suitable for above ground and below ground drain, waste and vent applications.

Referenced Standards:  AS/NZS1260


Hot Tags: as/nzs1260/floor waste gully, China, manufacturers, suppliers, factory
Inquiry