ERA Piping Systems ,PVC Pipe Fitting ,MALE ADAPTOR, US012, PN10(ISO1452),Socket, CE
Max 60℃ /140℉
PN10 ,10Bar, 1.0Mpa
PVC-U fittings are manufactured in accordance with EN1452-3 and ISO161/1
PVC fittings Solvent cement Manifold fittings
Tested and approved by the world’s premier certification institutes.
ERA fittings offer both high impact and high tensile strength.
Pressure ratings for plastic pipework systems are always quoted at 20 ° C, it is a fundamental principle of such systems that if the temperature is increased then the pressure rating must be reduced. PVC-U systems should never be used for temperatures in excess of 60 ° C. The following chart gives a rough guide as to the temperature/pressure relationship of PVC-U pipework systems.
PVC-U is resistant to most solutions of acids, alkalis, salts and solvents.
Fields of application:
Piping networks for irrigation, normal water transport for industry.
PVC fittings for pressure fluid applications.
Status Quo of PVC Pipe Industry
As one of the products of scientific and technological development, PVC pipes can be seen in daily life. In Europe, the growth rate of plastic pipes from 1980 to 1990 was 8%, and the output in 2001 reached 3.5 million tons, of which PVC pipes accounted for 60%. In 1985, the output of plastic pipes in the United States was 1.6 million tons, and in 1999, the output was about 3.6 million tons, of which PVC pipes accounted for 78%. The first UPVV flared pipe in China was born in Shenyang Plastic Factory in 1983. Since then, mainland China has the production capacity of PVC pipes and drainage pipes.