j-QR-code

Scan qrcode to view mobile website

  1. Home
  2. Products
  3. Pressure Pipe And Fittings For Hot And Cold
  4. II UNION
Categories
CPVC II UNION,CTS AND ASTM D2846 STANDARD,PRESSURE PIPES AND FITTINGS
CPVC II UNION,CTS AND ASTM D2846 STANDARD,PRESSURE PIPES AND FITTINGS
II UNION
II UNION
II UNION
II UNION
CPVC II UNION,CTS AND ASTM D2846 STANDARD,PRESSURE PIPES AND FITTINGS
II UNION
II UNION
II UNION
II UNION

II UNION

CPA007
1. High temperature resistance - Veka softening point is 30-40℃ higher than PVC, can be used for hot and cold water systems
2. Pressure resistance - the same pressure of the pipe, the wall thickness can be thinner than PVC.
3. Corrosion resistance - Enhanced acid, alkali, salt, oxidant and other liquid corrosion.
4. Good thermal insulation - with very low thermal conductivity
5. High flame retardant - can be used in fire piping system
CPVC CTS PIPES AND FITTINGS
ERA Piping Systems, CPVC Pipe Fitting ,  II UNION，CPA007, CTS (ASTM 2846) , NSF-pw & UPC 

System:  CPVC piping which is suitable for hot and cold water distribution has a 400 psi pressure rating at room temperature, and a 100 psi pressure rating at 180 F.

Scope:  CPVC piping for potable hot and cold water distribution systems is recognized in all model plumbing codes.

Specification:  The pressure ratings of the CTS SDR 11 systems are 400 psi (pounds per square inch) at 73 F and 100 psi at 180 F. CPVC plumbing pipe is sold in both straight lengths and (in small diameters) coils.

Specification:
Model NumberCPA007MaterialCPVC
DescriptionII UNIONSize15-63MM
StandardCTS / ASTM D2846ColorIvory color
BrandERATemperatureMax82.2°C / 180°F
ConnectionSocket or ThreadCertificateNSF、UPC
 
Main Products
Company introduction
Certificate exhibition
CPVC water supply pipe is a new type of water supply pipe, which is produced by extrucing and molding the resin as the main raw material. The biggest advantage of CPVC water supply pipe is high temperature resistance. If there is a large proportion of graphite filling material in the raw material of the CPVC pipe, it can also be used as a heat conduction pipe. This pipe in the domestic application is only in recent years, and it is mainly used in the water delivery of cold and hot water, thermochemical solution and waste liquid transportation pipeline. The long-term use of infusion temperature can reach 120 degrees Celsius, and the life is as long as 40 years.
Related Products
ERA DIN STANDARD PPR CROSS,DIN8077/8088S STANDARD FITTINGS FOR HOT AND COLD

PPR CROSS

1. Non toxic and hygienic. It is not only used for cold and hot water pipes, but also for purified drinking water systems. 2. Heat preservation and energy conservation. 3. Good heat resistance, which can meet the use requirements of hot water system in building water supply and drainage specifications. 4. Good thermal insulation performance. The thermal conductivity at 20 ℃ is only about 1/200 of steel pipe and 1/1400 of copper pipe. 5. Light weight, high strength, PPR density is 0.89 ～ 0.91g/cm3, which is only 1/9 of steel pipe and 1/10 of copper pipe.
PPR DIN STANDARD STRAIGHT TEE,PRESSURE PIPES AND FITTINGS FOR HOT AND COLD

STRAIGHT TEE

1. It is sanitary and non-toxic, and can be directly used for purified water and drinking water pipeline system. 2. It is corrosion resistant and not easy to scale, eliminating secondary pollution caused by corrosion and scaling of galvanized steel pipes. 3. It is heat-resistant and can transport hot water with a temperature below 70 ℃ for a long time, and can withstand an instantaneous high temperature of 95 ℃. 4 Long service life. 5 It is easy to install, and the strength of its connecting part is greater than that of the pipe itself. 6 Materials can be recycled.
ERA PPR WELD IN SADDLE,DIN STANDARD PIPES AND FITTINGS

PPR WELD IN SADDLE

1. For Industrial Gasses 2. Medical Gases in Hospital 3. Pipe rehabilitation in both plant and out of plant piping 4. Dredge Piping 5. Organic Chemicals 6. Reserve osmosis plants 7. Boiler Pipe line 8. Compressed Air Line
ERA DIN8077/8088 STANDARD PPR SOCKET,PRESSURE PIPES AND FITTINGS FOR HOT AND COLD

PPR SOCKET

1. Toxic and corrosive chemicals industry, for the flow of aggressive fluids. 2. Construction Industry for internal and external water pipelines network . 3. Toxic and corrosive chemicals industry, for the flow of aggressive fluids. 4. Reserve osmosis plants 5. For Industrial Gasses 6. Medical Gases in Hospital 7. SX Acid Mining
ERA PPR DIN STANDARD END CAP,DIN8077/8088 STANDARD FITTINGS FOR HOT AND COLD

PPR END CAP

3. It is heat-resistant and can transport hot water with a temperature below 70 ℃ for a long time, and can withstand an instantaneous high temperature of 95 ℃. 4. Good thermal insulation performance. The thermal conductivity at 20 ℃ is only about 1/200 of steel pipe and 1/1400 of copper pipe. 5. Light weight, high strength, PPR density is 0.89 ～ 0.91g/cm3, which is only 1/9 of steel pipe and 1/10 of copper pipe. 6. The fluid resistance in the pipe is small, the inner wall of the pipe is smooth, and it is not easy to scale. The fluid resistance is far lower than that of the metal pipe. 7. The hot melt socket connection is adopted, which is simple and reliable in installation and long in service life.
ERA PPR 90° ELBOW,DIN STANDARD FITTINGS FOR HOT AND COLD

PPR 90° ELBOW

1. Hygiene: no chemical action, it is a green building material with reliable hygienic performance. 2. The installation is convenient, reliable and time-saving. 3. Heat preservation and energy saving, with little heat loss for hot water pipeline. 4. Light weight, high strength, good toughness and good impact resistance. 5 It is easy to install, and the strength of its connecting part is greater than that of the pipe itself. 6 Materials can be recycled.
ERA PPR 45° ELBOW,DIN8077/8088 STANDARD PIPES AND FITTINGS

PPR 45° ELBOW

1. Beautiful appearance, light weight, convenient transportation and installation. 2. Excellent heat preservation and energy saving effect. 3. Good heat resistance 4. Withstand pressure, the maximum nominal pressure can reach 3.2Mpa 5. Good corrosion resistance 6. Long service life 7. Easy and reliable installation 8. Compared with galvanized pipe, PP-R pipe has lower cost and more convenient construction.
PPR STEP OVER BEND,DIN8077/8088 STANDARD PIPES AND FITTINGS

PPR Fitting Step Over Bend

1. It is non-toxic and sanitary, and can also be used in pure drinking water system. 2 Thermal insulation and energy conservation 3 Good heat resistance, which can meet the use requirements of hot water system in building water supply and drainage specifications. 4 Long service life. 5 It is easy to install, and the strength of its connecting part is greater than that of the pipe itself. 6 Materials can be recycled. 7. Corrosion resistance, no scaling: it can avoid scaling and blocking of pipes and yellow spot rust of water basins and bathtubs. 8. Long service life: It can be stored for more than 50 years.
Contact Us
USEFUL RESOURCES
OUR PRODUCTS
Send Us A Message

(373639)