PVC Fitting Thread Plug Pn10

PVC Fitting Thread Plug Pn10

ERA Piping Systems ,PVC Pipe Fitting ,/THREAD PLUG, US010, PN10(ISO1452),Socket, CE System: PVCPN10 (ISO1452) Pressure Pipe and Fitting System PVCis suitable for use at temperatures from 0ºC to 60ºC at a wide range of operating pressures, depending upon the system chosen. It is lightweight and...

Send InquiryChat Now
Product Details

ERA Piping Systems ,PVC Pipe Fitting ,/THREAD PLUG, US010, PN10(ISO1452),Socket, CE

图片4.png

System: 

PVCPN10 (ISO1452) Pressure Pipe and Fitting System

PVCis suitable for use at temperatures from 0ºC to 60ºC at a wide range of operating pressures, depending upon the system chosen. It is lightweight and easy to install, using cold solvent welded joints which require no special tools.

Scope:

This series of fittings can match the standard ISO 1452.

PVC fittings Solvent cement Manifold fittings

Specification:  

Pipe and fittings shall be manufactured from virgid PVC(polyvinyl chloride) vinyl compounds.

Perfect sealing under all conditions.

Features:  

PVC-U has high tensile strength, and high shock strength. The piping networks of PVC-U is not easy to break, and it works safely.

PVC-U has chemical resistance properties which are excellent being resistant to most solutions of salts, acids, alkalis and water soluble solvents. These products are NOT resistant to aromatic or chlorinated hydrocarbons.

Pressure ratings for plastic pipework systems are always quoted at 20 ° C, it is a fundamental principle of such systems that if the temperature is increased then the pressure rating must be reduced.  PVC-U systems should never be used for temperatures in excess of 60 ° C.  The following chart gives a rough guide as to the temperature/pressure relationship of PVC-U pipework systems.

Fields of application:

Piping networks for water supply in building.

Piping networks for water farming


Hot Tags: PVC fitting thread plug pn10, China, manufacturers, suppliers, factory
Inquiry