HDPE FITTINGS MALE TEE
1.Corrosion Resistance 2.Pipeline Rehabilitation 3.HDPE is lightweight and is often more cost effective to transport than metal pipes. 4.In trenchless installations, the physical characteristics of HDPE pipe enables you to use a smaller pipe, resulting in less ground disruption than when installing other fusible products.
ERA Piping Systems, HDPE Pipe Fitting , PESW013 MALE TEE, (ISO4427-2) , BUTT WELDING, WRAS
|Description:||Male Thread Tee||Standard:|
|Temperature:||Max 60°C / 140°F||Working Pressure:||PN10|
System: HDPE Pipe Fitting System
Properties of HDPE Pipe Fitting Male Thread Tee
High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum.
HDPE is known for its large strength to density ratio. The density of HDPE can range from 930 to 970 kg/m3. Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. The difference in strength exceeds the difference in density, giving HDPE a higher specific strength. It is also harder and more opaque and can withstand somewhat higher temperatures (120°C/ 248 °F for short periods). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions. The lack of branching is ensured by an appropriate choice of catalyst (e.g., Ziegler-Natta catalysts) and reaction conditions.
Referenced Standards: ISO 4427-2 / ISO 4427-3
Applications of HDPE Pipe Fitting Male Thread Tee
Corrosion is one of the most costly problems associated with metal piping systems. It occurs both inside and outside the pipe and affects hydraulic efficiency. Many cities treat their water to help slow rust and pitting that is inevitable with metal pipes. Others choose costly cathodic protection, plastic coating, or sleeving to try and extend the service life of the pipe.
Unlike traditional metal infrastructure products, HDPE pipe does not rust, rot or corrode. It is resistant to biological growth. This means an extended service life and long term cost savings.
Trenchless technologies are also used to rehabilitate old, failing pipelines with HDPE. There are several technologies to choose from when rehabilitating old pipelines. These technologies include slip lining and pipe bursting. Both are excellent techniques for cities to revitalize or replace and upsize older existing infrastructure.
Advantage of HDPE Pipe Fitting Male Thread Tee
1.HDPE is lightweight and is often more cost effective to transport than metal pipes.
2.In trenchless installations, the physical characteristics of HDPE pipe enables you to use a smaller pipe, resulting in less ground disruption than when installing other fusible products.