j-QR-code

Scan qrcode to view mobile website

  1. Home
  2. Products
  3. Pressure Pipe And Fittings For Hot And Cold
  4. PPR CROSS
Categories
ERA DIN STANDARD PPR CROSS,DIN8077/8088S STANDARD FITTINGS FOR HOT AND COLD
ERA DIN STANDARD PPR CROSS,DIN8077/8088S STANDARD FITTINGS FOR HOT AND COLD
PPR CROSS
PPR CROSS
PPR CROSS
PPR CROSS
ERA DIN STANDARD PPR CROSS,DIN8077/8088S STANDARD FITTINGS FOR HOT AND COLD
PPR CROSS
PPR CROSS
PPR CROSS
PPR CROSS

PPR CROSS

PRC001
1. Non toxic and hygienic. It is not only used for cold and hot water pipes, but also for purified drinking water systems.
2. Heat preservation and energy conservation.
3. Good heat resistance, which can meet the use requirements of hot water system in building water supply and drainage specifications.
4. Good thermal insulation performance. The thermal conductivity at 20 ℃ is only about 1/200 of steel pipe and 1/1400 of copper pipe.
5. Light weight, high strength, PPR density is 0.89 ～ 0.91g/cm3, which is only 1/9 of steel pipe and 1/10 of copper pipe.
PPR DIN PIPES AND FITTINGS
ERA Piping Systems, PPR Pipe Fitting ,PPR CROSS ,PRC001,(DIN8077/8088) , DVGW

System:  ERA PPR pipes, due to its high impact strengh and light weight makes it most reliable and sophisticated system to be employed in plumbing applictions and  water supply(hot and cold).

Scope:    
PPR pipes and fittings are suitable for hot and cold water transfer in buildings, underfloor and central heating systems. They can also be used for air ducts in industry and agriculture.

We produce PPR Pipes in 3 Pressure rating i.e. PN 10, PN 16, PN 20 and size from 16mm to 160mm and standard length is 4 mtr. However, length can be customized on volume requirements.

This specification covers PPR pipe and  fittings for pressure applications.This system is Intended for pressure applications where the operating temperature will not exceed  95 ℃.

The integrated system is easy to use and install, fulfills the stringent requirements of the water sector and offers excellent value for money.

Specification:
These PPR systems have a high temperature and pressure resistance and are suitable for drinking water.

PPR pipe and fittings conforming to DIN 8077&DIN 8078. Pipe and fittings shall be manufactured as a system and be the product of one manufacturer.

PPR is light weight, easy to install, and reduces the number of fittings needed in a system because of its flexibility.

PPR is very economically placed in comparison to most of the alternative piping system.

Referenced Standards:  DIN 8077&DIN8078  DVGW examination certificate


Specification:
Model NumberPRC001MaterialPPR
DescriptionPPR CROSSSize20-32MM
StandardDIN8077/8088ColorGREEN、GREY
BrandERATemperatureMax 95°C / 203°F
ConnectionSocket CertificateDVGW
 
Main Products

Company introduction
Certificate exhibition


FAQ
1.What is your MOQ?
 Our MOQ is usually 5 CTNS.
 
2.What is your delievery time?
 The time of delievery is around 30-45days.
 
3.What is the shipping port?
 We ship the goods via Ningbo or Shanghai port.
 
4.What is your payment terms?
 We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.
 
5.How should I contact you?
 You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.
 
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.
If you would like to have a visit, you are much welcome.
 
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
 
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 ERA is a listed company. Everything can be rest assured working with us.
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.

Hot Tags: PPR CROSS, China, manufacturers, suppliers, factory 
Related Products
PPR DIN STANDARD STRAIGHT TEE,PRESSURE PIPES AND FITTINGS FOR HOT AND COLD

STRAIGHT TEE

1. It is sanitary and non-toxic, and can be directly used for purified water and drinking water pipeline system. 2. It is corrosion resistant and not easy to scale, eliminating secondary pollution caused by corrosion and scaling of galvanized steel pipes. 3. It is heat-resistant and can transport hot water with a temperature below 70 ℃ for a long time, and can withstand an instantaneous high temperature of 95 ℃. 4 Long service life. 5 It is easy to install, and the strength of its connecting part is greater than that of the pipe itself. 6 Materials can be recycled.
ERA PPR WELD IN SADDLE,DIN STANDARD PIPES AND FITTINGS

PPR WELD IN SADDLE

1. For Industrial Gasses 2. Medical Gases in Hospital 3. Pipe rehabilitation in both plant and out of plant piping 4. Dredge Piping 5. Organic Chemicals 6. Reserve osmosis plants 7. Boiler Pipe line 8. Compressed Air Line
ERA DIN8077/8088 STANDARD PPR SOCKET,PRESSURE PIPES AND FITTINGS FOR HOT AND COLD

PPR SOCKET

1. Toxic and corrosive chemicals industry, for the flow of aggressive fluids. 2. Construction Industry for internal and external water pipelines network . 3. Toxic and corrosive chemicals industry, for the flow of aggressive fluids. 4. Reserve osmosis plants 5. For Industrial Gasses 6. Medical Gases in Hospital 7. SX Acid Mining
ERA PPR DIN STANDARD END CAP,DIN8077/8088 STANDARD FITTINGS FOR HOT AND COLD

PPR END CAP

3. It is heat-resistant and can transport hot water with a temperature below 70 ℃ for a long time, and can withstand an instantaneous high temperature of 95 ℃. 4. Good thermal insulation performance. The thermal conductivity at 20 ℃ is only about 1/200 of steel pipe and 1/1400 of copper pipe. 5. Light weight, high strength, PPR density is 0.89 ～ 0.91g/cm3, which is only 1/9 of steel pipe and 1/10 of copper pipe. 6. The fluid resistance in the pipe is small, the inner wall of the pipe is smooth, and it is not easy to scale. The fluid resistance is far lower than that of the metal pipe. 7. The hot melt socket connection is adopted, which is simple and reliable in installation and long in service life.
ERA PPR 90° ELBOW,DIN STANDARD FITTINGS FOR HOT AND COLD

PPR 90° ELBOW

1. Hygiene: no chemical action, it is a green building material with reliable hygienic performance. 2. The installation is convenient, reliable and time-saving. 3. Heat preservation and energy saving, with little heat loss for hot water pipeline. 4. Light weight, high strength, good toughness and good impact resistance. 5 It is easy to install, and the strength of its connecting part is greater than that of the pipe itself. 6 Materials can be recycled.
ERA PPR 45° ELBOW,DIN8077/8088 STANDARD PIPES AND FITTINGS

PPR 45° ELBOW

1. Beautiful appearance, light weight, convenient transportation and installation. 2. Excellent heat preservation and energy saving effect. 3. Good heat resistance 4. Withstand pressure, the maximum nominal pressure can reach 3.2Mpa 5. Good corrosion resistance 6. Long service life 7. Easy and reliable installation 8. Compared with galvanized pipe, PP-R pipe has lower cost and more convenient construction.
PPR STEP OVER BEND,DIN8077/8088 STANDARD PIPES AND FITTINGS

PPR Fitting Step Over Bend

1. It is non-toxic and sanitary, and can also be used in pure drinking water system. 2 Thermal insulation and energy conservation 3 Good heat resistance, which can meet the use requirements of hot water system in building water supply and drainage specifications. 4 Long service life. 5 It is easy to install, and the strength of its connecting part is greater than that of the pipe itself. 6 Materials can be recycled. 7. Corrosion resistance, no scaling: it can avoid scaling and blocking of pipes and yellow spot rust of water basins and bathtubs. 8. Long service life: It can be stored for more than 50 years.
ERA PPR DIN8077/8088 STANDARD PIPES,PRESSURE FOR HOT AND COLD

PPR Pressure Pipe

1. Hygiene: no chemical action, it is a green building material with reliable hygienic performance. 2. The installation is convenient, reliable and time-saving. 3. Heat preservation and energy saving, with little heat loss for hot water pipeline. 4. Light weight, high strength, good toughness and good impact resistance. 5. The inner and outer walls of the product are smooth, the flow resistance is small, and the energy consumption of the fluid conveying system is small. 6. Strong heat resistance
Contact Us
USEFUL RESOURCES
OUR PRODUCTS
Send Us A Message

(373639)