CPVC FITTINGS DOUBLE SOCKET
ERA Piping Systems, CPVC Pipe Fitting, DOUBLE SOCKET, CP006, (DIN STANDARD), CE System: CPVC DIN 8049 Hot and Cold Domestic Water Distribution CPVC is used for higher temperature applications than PVC, especially for handling hot corrosive liquids. With similar chemical and corrosion resistance...
ERA Piping Systems, CPVC Pipe Fitting, DOUBLE SOCKET, CP006, (DIN STANDARD), CE
CPVC DIN 8049 Hot and Cold Domestic Water Distribution
CPVC is used for higher temperature applications than PVC, especially for handling hot corrosive liquids. With similar chemical and corrosion resistance to PVC. Increased chlorine content gives CPVC superior thermal resistance. CPVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. ERA CPVC materials conform to ASTM Cell Classification 23447-B (formerly designated as Type IV, Grade 1). The maximum recommended service temperature of CPVC products is 93°C (200°F).
Characterized by unique thermal, physical and mechanical properties CPVC is desirable for piping applications which require high temperature rating, high impact resistance and fire resistance. Manufactured to various international ASTM / DIN standards our high pressure CPVC pipes and fittings are widely used in many fileds.
This specification covers CPVC DIN 8079 manufactured to standard dimensional ratio (SDR) 11 for hot and cold domestic water distribution. This system is intended for pressure applications where the operating temperature will not exceed 180°F at 100psi.
ERA BRAND PVC-C has been designed for enhanced chemical resistance and exceptional temperature stability. Metric PVC-C systems are in use wherever aggressive media such as mixed acid waste or alkalis at a high temperature are transported.
Pipe and fittings shall be manufactured from virgin rigid chlorinated poly(vinyl chloride).
CPVC pipe and fittings shall conform to DIN 8079. Pipe and fittings shall be manufactured to the nominal dimension cited in the applicable ASTM standard, and shall be made by one manufacturer. Fittings shall be injection molded.
Very good mechanical characteristics, also at elevated temperatures
Optimal chemical resistance against many mineral acids, bases & salt solutions
Proven physiological harmlessness
High burning resistance - will not sustain combustion when the ignition source is removed
d10 - d400 mm
Fields of application:
Water and Wastewater Treatment