CPVC CTS FITTINGS Y MALE/FEMALE ELBOW

CPVC CTS FITTINGS Y MALE/FEMALE ELBOW

ERA Piping Systems, CPVC Pipe Fitting, Y MALE/FEMALE ELBOW, CPAS017, CTS (ASTM 2846) , NSF-pw & UPC System: ERA CPVC has a rated working pressure of 100 PSI at 180 degrees Fahrenheit and 400 PSI at 73 degrees Fahrenheit. Makes the job site safer by eliminating the need for an open flame to...

Send InquiryChat Now
Product Details

ERA Piping Systems, CPVC Pipe Fitting, Y MALE/FEMALE ELBOW, CPAS017, CTS (ASTM 2846) , NSF-pw & UPC 

图片39.jpg

System:  

ERA CPVC has a rated working pressure of 100 PSI at 180 degrees Fahrenheit and 400 PSI at 73 degrees Fahrenheit.

Makes the job site safer by eliminating the need for an open flame to solder the joints together.

CPVC piping which is suitable for hot and cold water distribution has a 400 psi pressure rating at room temperature, and a 100 psi pressure rating at 180 F.

CPVC materials are resistant to many everyday household chemicals.


Scope:   This specification covers Copper Tube Size (CTS) CPVC manufactured to standard dimensional ratio (SDR) 11 for hot and cold domestic water distribution. This system is intended for pressure applications where the operating temperature will not exceed 180°F at 100psi.

Chlorinated polyvinyl chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC; CPVC will not rust, pit, scale or corrode

The CPVC pipe has comparable corrosion resistance to PVC pipe yet it is suitable for handling corrosive material at temps 40 to 60 deg F higher than PVC.

CPVC piping for potable hot and cold water distribution systems is recognized in all model plumbing codes.


Specification:  Pipe and fittings shall be manufactured from virgin rigid chlorinated poly(vinyl chloride).

It is lightweight, easy to assemble and install. Job-site erection of a leakproof joint can be made in only a minute with solvent cement, or by threading.

Do not use with compressed air or other gases.

CPVC pipe and fittings shall conform to ASTM D2846. Pipe and fittings shall be manufactured to the nominal dimension cited in the applicable ASTM standard, and shall be made by one manufacturer. Fittings shall be injection molded.

LISTINGS - NSF/ANSI Standard 14: Plastics Piping system Components and Related Materials. Includes /ANSI Standard 61, Annex G

Hot Tags: cpvc cts fittings y male/female elbow, China, manufacturers, suppliers, factory
Inquiry