j-QR-code

Scan qrcode to view mobile website

  1. Home
  2. Products
  3. Pressure Pipe And Fittings For Hot And Cold
  4. CPVC CTS FITTINGS MALE ADAPTOR II
Categories
CPVC CTS AND ASTM D2846 STANDARD MALE ADAPTOR II,PRESSURE PIPES AND FITTINGS FOR HOT AND COLD
CPVC CTS AND ASTM D2846 STANDARD MALE ADAPTOR II,PRESSURE PIPES AND FITTINGS FOR HOT AND COLD
CPVC CTS FITTINGS MALE ADAPTOR II
CPVC CTS FITTINGS MALE ADAPTOR II
CPVC CTS FITTINGS MALE ADAPTOR II
CPVC CTS FITTINGS MALE ADAPTOR II
CPVC CTS AND ASTM D2846 STANDARD MALE ADAPTOR II,PRESSURE PIPES AND FITTINGS FOR HOT AND COLD
CPVC CTS FITTINGS MALE ADAPTOR II
CPVC CTS FITTINGS MALE ADAPTOR II
CPVC CTS FITTINGS MALE ADAPTOR II
CPVC CTS FITTINGS MALE ADAPTOR II

CPVC CTS FITTINGS MALE ADAPTOR II

CPA012
1. CPVC power pipes are mainly made of PVC-C resin with excellent heat resistance and insulation performance. CPVC products are currently recognized as green and environment-friendly products, with smooth inner and outer walls
2. CPVC power pipe can keep deformation under the environment above 93 ℃, and has sufficient strength.
3. Good insulation performance
CPVC power pipe can withstand high voltage above 30000 volts.
4. Good dimensional stability
5. Low cost
6. Good weather resistance
CPVC CTS PIPES AND FITTINGS
ERA Piping Systems, CPVC Pipe Fitting ,  MALE ADAPTOR II ，CPA012, CTS (ASTM 2846) , NSF-pw & UPC  

System: 
Used for potable hot and cold water distribution，with solvent weld joints, and is easy to install.
Ultra-Pure CPVC meets or exceeds all relevant industry standards.
Scope:  
ASTM F 493: Specification for solvent cements for Chlorinated Poly (Vinyl Chloride) (CPVC) plastic pipe and fittings.
With better heat retention and lower hot water heating costs as compared to metallic systems. It is non-toxic and meets the most stringent standards in the industry.
Specification:
Do not use with compressed air or other gases.
CPVC pipe and fittings shall conform to ASTM D2846. Pipe and fittings shall be manufactured to the nominal dimension cited in the applicable ASTM standard, and shall be made by one manufacturer. Fittings shall be injection molded.

 
Specification:
Model NumberCPA012MaterialCPVC
DescriptionMALE ADAPTORSize1/2''-1''
StandardCTS / ASTM D2846ColorIvory color
BrandERATemperatureMax82.2°C / 180°F
ConnectionSocket or ThreadCertificateNSF、UPC

Main Products
Company introduction
Certificate exhibition
It's a plastic tube. CPVC is just a model. CPVC SCH80 and PVC SCH80 have the same characteristics, the degree of chlorination of this resin is higher, additional chlorine, can increase the use temperature up to 100°C, and the density is also high, good wear resistance, low combustion, low smoke, with the function of limiting flame diffusion, more excellent weathering.
Related Products
ERA BRAND DIN8077/8088 STANDARD PPR Fitting Union Two Side Weld,PRESSURE FOR HOT AND COLD

PPR Fitting Union Two Side Weld

1. Hygiene: no chemical action, it is a green building material with reliable hygienic performance. 2. The installation is convenient, reliable and time-saving. 3. Heat preservation and energy saving, with little heat loss for hot water pipeline. 4. Light weight, high strength, good toughness and good impact resistance. 5. The inner and outer walls of the product are smooth, the flow resistance is small, and the energy consumption of the fluid conveying system is small. 6. Strong heat resistance
ERA BRAND DIN8077/8088 STANDARD PPR Fitting Reducing Socket,PRESSURE FOR HOT AND COLD

PPR Fitting Reducing Socket

1. Hygiene: no chemical action, it is a green building material with reliable hygienic performance. 2. The installation is convenient, reliable and time-saving. 3. Heat preservation and energy saving, with little heat loss for hot water pipeline. 4. Light weight, high strength, good toughness and good impact resistance. 5. The inner and outer walls of the product are smooth, the flow resistance is small, and the energy consumption of the fluid conveying system is small. 6. Strong heat resistance
PPR DIN STANDARD REDUCING TEE,DIN8077/8088 STANDARD FITTINGS

PPR Fitting REDUCING TEE

1. Non toxic and hygienic. It is not only used for cold and hot water pipes, but also for purified drinking water systems. 2. Heat preservation and energy conservation. 3. Good heat resistance, which can meet the use requirements of hot water system in building water supply and drainage specifications. 4. Long service life. 5. It is easy to install and firmly connected. 6. The materials can be recycled. Does not affect product quality
ERA PPR DIN8077/8088 STANDARD FEMALE THREAD BUSH, PRESSURE FOR HOT AND COLD

PPR FEMALE THREAD BUSH

1. Hygiene: no chemical action, it is a green building material with reliable hygienic performance. 2. The installation is convenient, reliable and time-saving. 3. Heat preservation and energy saving, with little heat loss for hot water pipeline. 4. Light weight, high strength, good toughness and good impact resistance. 5. The inner and outer walls of the product are smooth, the flow resistance is small, and the energy consumption of the fluid conveying system is small. 6. Strong heat resistance
ERA PPR DIN8077/8088 STANDARD FEMALE THREAD ELBOW, PRESSURE FOR HOT AND COLD

PPR FEMALE THREAD ELBOW

1. Hygiene: no chemical action, it is a green building material with reliable hygienic performance. 2. The installation is convenient, reliable and time-saving. 3. Heat preservation and energy saving, with little heat loss for hot water pipeline. 4. Light weight, high strength, good toughness and good impact resistance. 5. The inner and outer walls of the product are smooth, the flow resistance is small, and the energy consumption of the fluid conveying system is small. 6. Strong heat resistance
ERA PPR DIN8077/8088 STANDARDFEMALE THREAD ELBOW WALL PLATE, PRESSURE FOR HOT AND COLD

PPR FEMALE THREAD ELBOW WALL PLATE

1. Ppr pipe is environmentally friendly: ppr pipe is environmentally friendly. Its raw material molecules are only carbon and hydrogen, and there are no harmful and toxic elements. It is also very sanitary. It can not only be used as a cold and hot water pipe, but also as a pure drinking water system. 2. Thermal insulation and energy conservation of ppr pipe: the thermal conductivity of ppr pipe is 0.21w/mk, and the ratio to steel pipe is 1/200, which shows that its thermal insulation and energy conservation effect is very good. 3. Ppr pipe has good heat resistance: ppr pipe has good heat resistance, its Vicat softening point is 131.5 ℃, and its maximum working temperature can reach 95 ℃, which can meet the requirements of hot water system in building codes. 4. The service life of ppr pipe is long: ppr pipe can work at 70 ℃, and its service life can reach more than 50 years. Compared with other materials, its service life is longer. If it works at 20 ℃ at room temperature, its service life can reach more than 100 years. 5. Convenient installation of ppr pipes: because ppr pipes have good welding performance, pipes and pipe fittings can be connected by hot melting and electric melting. The installation is very convenient and the joints are very reliable.
ERA PPR DIN8077/8088 STANDARD MALE THREAD BUSH, PRESSURE FOR HOT AND COLD

PPR MALE THREAD BUSH

1. Ppr pipe is environmentally friendly: ppr pipe is environmentally friendly. Its raw material molecules are only carbon and hydrogen, and there are no harmful and toxic elements. It is also very sanitary. It can not only be used as a cold and hot water pipe, but also as a pure drinking water system. 2. Thermal insulation and energy conservation of ppr pipe: the thermal conductivity of ppr pipe is 0.21w/mk, and the ratio to steel pipe is 1/200, which shows that its thermal insulation and energy conservation effect is very good. 3. Ppr pipe has good heat resistance: ppr pipe has good heat resistance, its Vicat softening point is 131.5 ℃, and its maximum working temperature can reach 95 ℃, which can meet the requirements of hot water system in building codes. 4. The service life of ppr pipe is long: ppr pipe can work at 70 ℃, and its service life can reach more than 50 years. Compared with other materials, its service life is longer. If it works at 20 ℃ at room temperature, its service life can reach more than 100 years. 5. Convenient installation of ppr pipes: because ppr pipes have good welding performance, pipes and pipe fittings can be connected by hot melting and electric melting. The installation is very convenient and the joints are very reliable.
ERA PPR DIN8077/8088 STANDARD MALE THREAD ELBOW, PRESSURE FOR HOT AND COLD

PPR MALE THREAD ELBOW

1. Ppr pipe is environmentally friendly: ppr pipe is environmentally friendly. Its raw material molecules are only carbon and hydrogen, and there are no harmful and toxic elements. It is also very sanitary. It can not only be used as a cold and hot water pipe, but also as a pure drinking water system. 2. Thermal insulation and energy conservation of ppr pipe: the thermal conductivity of ppr pipe is 0.21w/mk, and the ratio to steel pipe is 1/200, which shows that its thermal insulation and energy conservation effect is very good. 3. Ppr pipe has good heat resistance: ppr pipe has good heat resistance, its Vicat softening point is 131.5 ℃, and its maximum working temperature can reach 95 ℃, which can meet the requirements of hot water system in building codes. 4. The service life of ppr pipe is long: ppr pipe can work at 70 ℃, and its service life can reach more than 50 years. Compared with other materials, its service life is longer. If it works at 20 ℃ at room temperature, its service life can reach more than 100 years. 5. Convenient installation of ppr pipes: because ppr pipes have good welding performance, pipes and pipe fittings can be connected by hot melting and electric melting. The installation is very convenient and the joints are very reliable.
Contact Us
USEFUL RESOURCES
OUR PRODUCTS
Send Us A Message

(373639)