PVC DWV Fitting Female Adaptor Slip×fipt

PVC DWV Fitting Female Adaptor Slip×fipt

ERA Piping Systems, PVC DWV Pipe Fitting, UDA006 FEMALE ADAPTOR SLIP X FIPT, (ASTM D2665), NSF-pw & CUPC System: Individual fittings unassembled shall withstand a minimum load of 750 lbf/ft (11 kN/m) of centerline length without cracking or other visible evidence of failure. Scope: This...

Send Inquiry
Product Details

ERA Piping Systems, PVC DWV Pipe Fitting, UDA006 FEMALE ADAPTOR  SLIP X FIPT, (ASTM D2665), NSF-pw & CUPC

图片38.png

System:  Individual fittings unassembled shall withstand a minimum load of 750 lbf/ft (11 kN/m) of centerline length without cracking or other visible evidence of failure.

Scope: This specification covers requirements for (PVC) plastic drain, waste, and vent pipe and fittings suitable for the drainage and venting of sewage and certain other liquid waste.

Research Institute

1. CNAS ISO 17025 ACCREDITED LAB, be able to issue test report on Chinese standard with CANAS.

2. IAPMO RESEARCH AND TEST ,INC. ACCREDITED LAB , accredited to issue test reports on Standards:  ASTM D2466, ASTM D2665, ASTM D2846, ASTM F439, ASTM F1970. 

3. Introducing IPT -- Hydrastatic test machine from Germany, capable of 20-95 ℃, 0.5-115 bar hydrostatic test, which almost cover all standards' hydrostatic test requirements.

4. Built as per GB/ ISO9001 standard, control quality from the raw material.


Specification: DWV parts are made with the same threading (NPT) and are made to the same size as standard PVC fittings. Since this is the case, DWV and schedule 40 and 80 pipe and fittings will fit together, but it isn't recommended that they be used together. Note: DWV parts should never be used to carry pressurized liquids or gas.

The pipe shall be as uniform as commercially practicable in color, opacity, density, and other physical properties.


Hot Tags: PVC DWV fitting female adaptor slip×fipt, China, manufacturers, suppliers, factory
Inquiry