As/nzs1260/45°side Access Junction Left F/f

As/nzs1260/45°side Access Junction Left F/f

ERA Piping Systems, PVC DWV Pipe Fitting, AS/NZS1260/ 45°SIDE ACCESS JUNCTION LEFT F/F, AUDT04,WATERMARK ADVANTAGES ERA Reputation System: PVC DWV Pipe Fitting AS/NZS1260 System Vinidex DWV pipes and fittings are manufactured and tested in accordance with AS/NZS 1260 – PVC-U pipes and fittings...

Send Inquiry
Product Details

ERA Piping Systems, PVC DWV Pipe Fitting,  AS/NZS1260/  45°SIDE ACCESS JUNCTION LEFT F/F, AUDT04,WATERMARK

图片3.png

ADVANTAGES

ERA Reputation

System: PVC DWV Pipe Fitting AS/NZS1260 System

Vinidex DWV pipes and fittings are manufactured and tested in accordance with AS/NZS 1260 – PVC-U pipes and fittings for drain, waste and vent application.

 “The StandardsMark™ on a product is an independent assurance to the customer that the product has undergone a rigorous audit and testing program.”

Scope:  

Drain, Waste and Vent Pipes (DWV) comply with AS/NZS 1260 and are WaterMark Level 1 Certified.

DWV pipes are used for drainage and non-pressure sewerage systems where the pipeline is operating under gravity flow with low operating pressure.

Drain, Waste and Vent Pipes are to be installed in accordance to AS/NZS 2032.

Specification: 

DWV pipes up to 80mm are specified in terms of their dimensions and have a specified minimum wall thickness. As well as dimensions to ensure compatibilty of joints, DWV pipes 100mm and above are specified in terms of minimum ring bending stiffness as measured in a standard test and designated by an ‘SN’ classification.

Larger diameter pipes are commonly used in buried applications and ring bending stiffness is a fundamental consideration for buried flexible pipes.

SN4 and SN6 are generally used for plumbing and domestic applications, whereas the higher SN8 and SN10 rated pipes are used for municipal drainage and sewerage reticulation applications.


Hot Tags: as/nzs1260/45°side access junction left f/f, China, manufacturers, suppliers, factory
Inquiry